topic Re: PIX Message Code in Network Security https://community.cisco.com/t5/network-security/pix-message-code/m-p/739948#M978207 <HTML><HEAD></HEAD><BODY><P>It could be 111002 or 111008 ,this code at least indicates the following:</P><P></P><P>111002 </P><P>Error Message %PIX-5-111002: Begin configuration: IP_address writing to device</P><P>Explanation This message is logged when you enter the write command to store your configuration on a device (either floppy, Flash memory, TFTP, the failover standby unit, or the console terminal). The IP_address indicates whether the login was made at the console port or via a Telnet connection. </P><P></P><P>111008 </P><P>Error Message %PIX-5-111008: User user executed the command string</P><P>Explanation This syslog message is for accounting purposes. The user entered a command that modified the configuration. </P><P></P><P></P><P></P><P></P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/pix/pix63/system/message/pixemsgs.html" target="_blank">http://www.cisco.com/en/US/docs/security/pix/pix63/system/message/pixemsgs.html</A></P><P></P><P></P><P>Rgds</P><P></P><P>Jorge</P><P></P><P></P><P></P><P> </P><P></P></BODY></HTML> Tue, 19 Jun 2007 13:46:05 GMT JORGE RODRIGUEZ 2007-06-19T13:46:05Z PIX Message Code https://community.cisco.com/t5/network-security/pix-message-code/m-p/739947#M978206 <P>What is the PIX Message code for when the config or policy has been changed on a PIX firewall?</P><P></P><P></P> Mon, 11 Mar 2019 10:32:26 GMT https://community.cisco.com/t5/network-security/pix-message-code/m-p/739947#M978206 kerraj2004 2019-03-11T10:32:26Z Re: PIX Message Code https://community.cisco.com/t5/network-security/pix-message-code/m-p/739948#M978207 <HTML><HEAD></HEAD><BODY><P>It could be 111002 or 111008 ,this code at least indicates the following:</P><P></P><P>111002 </P><P>Error Message %PIX-5-111002: Begin configuration: IP_address writing to device</P><P>Explanation This message is logged when you enter the write command to store your configuration on a device (either floppy, Flash memory, TFTP, the failover standby unit, or the console terminal). The IP_address indicates whether the login was made at the console port or via a Telnet connection. </P><P></P><P>111008 </P><P>Error Message %PIX-5-111008: User user executed the command string</P><P>Explanation This syslog message is for accounting purposes. The user entered a command that modified the configuration. </P><P></P><P></P><P></P><P></P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/pix/pix63/system/message/pixemsgs.html" target="_blank">http://www.cisco.com/en/US/docs/security/pix/pix63/system/message/pixemsgs.html</A></P><P></P><P></P><P>Rgds</P><P></P><P>Jorge</P><P></P><P></P><P></P><P> </P><P></P></BODY></HTML> Tue, 19 Jun 2007 13:46:05 GMT https://community.cisco.com/t5/network-security/pix-message-code/m-p/739948#M978207 JORGE RODRIGUEZ 2007-06-19T13:46:05Z