topic Re: Routing issue when using Remote access in Network Security https://community.cisco.com/t5/network-security/routing-issue-when-using-remote-access/m-p/736591#M979511 <HTML><HEAD></HEAD><BODY><P>I didn't include the IPsec NAT-Traversal on the ASA5520...its working fine now</P></BODY></HTML> Sun, 03 Jun 2007 15:28:21 GMT mahzoddc06 2007-06-03T15:28:21Z Routing issue when using Remote access https://community.cisco.com/t5/network-security/routing-issue-when-using-remote-access/m-p/736590#M979507 <P>Hi All,</P><P></P><P>I have the following setup:</P><P></P><P>layer 3 Switch --192.168.1.x/24-- ASA5520 --192.168.7.x/24-- Internet Router ----- VSAT</P><P></P><P>I have configured the Internet Router to do PATing for the DATA VLAN on the L3 Switch. I have also configure the Internet Router to redirect any request for UDP 500 to the Outside Interface of ASA5520</P><P></P><P>I am able to establish a VPN tunnel which successfully terminates on the Outside interface of the ASA5520, however i am having a problem pinging the internal vlans (such as the DATA VLAN).</P><P></P><P>I have set the ASA5520 with the "tunneled default route".</P><P></P><P>Any ideas to trouble this problem??</P><P></P> Mon, 11 Mar 2019 10:24:13 GMT https://community.cisco.com/t5/network-security/routing-issue-when-using-remote-access/m-p/736590#M979507 mahzoddc06 2019-03-11T10:24:13Z Re: Routing issue when using Remote access https://community.cisco.com/t5/network-security/routing-issue-when-using-remote-access/m-p/736591#M979511 <HTML><HEAD></HEAD><BODY><P>I didn't include the IPsec NAT-Traversal on the ASA5520...its working fine now</P></BODY></HTML> Sun, 03 Jun 2007 15:28:21 GMT https://community.cisco.com/t5/network-security/routing-issue-when-using-remote-access/m-p/736591#M979511 mahzoddc06 2007-06-03T15:28:21Z