FTD can not directly forwarding when FMC connect to

vuthaibao — Fri, 21 Feb 2020 16:59:38 GMT

Hello,

I plan to do demo with topology below:

I used evaluation license for this demo(90 days).

When FTD run in standalone mode(locally management) => everything is OK, it can do route to forwarding packet, detect macilious request and download malware file.

When I add FMC management to FTD => FTD can not directly forwarding packet. FTD interfaces can not ping each other and didn't any directly route.

More troubleshoot information:

FTD route table:

Captured ping packet when ping from 172.163.90.50 to 10.15.15.50:

Policy apply from FMC to FTD:

Config1 file: the FTD running-config when locally management=> running OK.

Config2 file: the FTD ruuning-config when FMC management => can not directly forwarding.

Hope your support! Thank you very much!

Re: FTD can not directly forwarding when FMC connect to

Marvin Rhoads — Sun, 31 Mar 2019 03:15:53 GMT

Odd that your capture notes "no route to host". For a connected subnet that's usually what we see when the interface is down.

Can you check the output of packet-tracer? Also provide "show interface" output.

topic Re: FTD can not directly forwarding when FMC connect to in Network Security

FTD can not directly forwarding when FMC connect to

Re: FTD can not directly forwarding when FMC connect to