topic Re: Spliting 525 active passive/failover in Network Security https://community.cisco.com/t5/network-security/spliting-525-active-passive-failover/m-p/715653#M982313 <HTML><HEAD></HEAD><BODY><P>Just make sure that you don't have FO (Failover Only) license on either of the two PIXs if you intend to use them separately as standalone devices. PIX with FO license cannot be used in standalone mode. If that's the case, then you will need to get a new license for that PIX - either R (Restricted) or UR (Unrestricted).</P></BODY></HTML> Wed, 22 Aug 2007 11:55:33 GMT hsajwan 2007-08-22T11:55:33Z Spliting 525 active passive/failover https://community.cisco.com/t5/network-security/spliting-525-active-passive-failover/m-p/715652#M982312 <P>I have 2 525 pix?s in an active passive fail over configuration. I need to split them to use them as individual firewalls, is there anything I should be aware of? Will I need to re-license the individual pix's etc?</P><P></P><P>Thanks</P><P></P> Mon, 11 Mar 2019 11:00:53 GMT https://community.cisco.com/t5/network-security/spliting-525-active-passive-failover/m-p/715652#M982312 DASHelpdesk 2019-03-11T11:00:53Z Re: Spliting 525 active passive/failover https://community.cisco.com/t5/network-security/spliting-525-active-passive-failover/m-p/715653#M982313 <HTML><HEAD></HEAD><BODY><P>Just make sure that you don't have FO (Failover Only) license on either of the two PIXs if you intend to use them separately as standalone devices. PIX with FO license cannot be used in standalone mode. If that's the case, then you will need to get a new license for that PIX - either R (Restricted) or UR (Unrestricted).</P></BODY></HTML> Wed, 22 Aug 2007 11:55:33 GMT https://community.cisco.com/t5/network-security/spliting-525-active-passive-failover/m-p/715653#M982313 hsajwan 2007-08-22T11:55:33Z