topic How to configure on ASA5100 w/AIP-SSM-10? in Network Security https://community.cisco.com/t5/network-security/how-to-configure-on-asa5100-w-aip-ssm-10/m-p/574587#M98485 <P>I'm studying the ASA5100 w/ATP-SSM10 and want to clarify how it works. please guide or correct me.</P><P></P><P>1. Command and control interface=g0/0</P><P></P><P>2. Sensing interface=vs0 (logical concept. not physical)</P><P></P><P>3. Promiscuous mode=sends any combination traffic from ASA(even all foure interfaces) to AIP-SSM g0/1</P><P></P><P>4. Inline mode=Not clear how this works. how can I create the inline PAIR since only one physical interface(g0/1) on the AIP-SSM? the doc says inline supporting by g0/1 and the combination "by security context". </P><P></P><P>Thanks in advance,</P> Sun, 10 Mar 2019 10:00:38 GMT cjrchoi11 2019-03-10T10:00:38Z How to configure on ASA5100 w/AIP-SSM-10? https://community.cisco.com/t5/network-security/how-to-configure-on-asa5100-w-aip-ssm-10/m-p/574587#M98485 <P>I'm studying the ASA5100 w/ATP-SSM10 and want to clarify how it works. please guide or correct me.</P><P></P><P>1. Command and control interface=g0/0</P><P></P><P>2. Sensing interface=vs0 (logical concept. not physical)</P><P></P><P>3. Promiscuous mode=sends any combination traffic from ASA(even all foure interfaces) to AIP-SSM g0/1</P><P></P><P>4. Inline mode=Not clear how this works. how can I create the inline PAIR since only one physical interface(g0/1) on the AIP-SSM? the doc says inline supporting by g0/1 and the combination "by security context". </P><P></P><P>Thanks in advance,</P> Sun, 10 Mar 2019 10:00:38 GMT https://community.cisco.com/t5/network-security/how-to-configure-on-asa5100-w-aip-ssm-10/m-p/574587#M98485 cjrchoi11 2019-03-10T10:00:38Z Re: How to configure on ASA5100 w/AIP-SSM-10? https://community.cisco.com/t5/network-security/how-to-configure-on-asa5100-w-aip-ssm-10/m-p/574588#M98486 <HTML><HEAD></HEAD><BODY><P>The detailed configuration process can be had from the following link.</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/ps6120/products_installation_and_configuration_guides_list.html" target="_blank">http://www.cisco.com/en/US/products/ps6120/products_installation_and_configuration_guides_list.html</A></P><P></P><P>make sure that you are running the latest versions of operating systems</P><P></P></BODY></HTML> Tue, 16 May 2006 12:50:52 GMT https://community.cisco.com/t5/network-security/how-to-configure-on-asa5100-w-aip-ssm-10/m-p/574588#M98486 b.hsu 2006-05-16T12:50:52Z