topic Re: Pix and vcs (veritas cluster) in Network Security https://community.cisco.com/t5/network-security/pix-and-vcs-veritas-cluster/m-p/804597#M985682 <HTML><HEAD></HEAD><BODY><P>Your access-list entry is not correct. Hard to tell what you have really but when applied to a inbound interface the ACL should look like the following:</P><P></P><P>access-list acl_inside permit tcp host c.c.c.c host s.s.s.s eq 14141</P><P></P><P>Looks like you are allowing only traffic sourcing from 14141 rather than destined to. Post a scrubbed config if you still are not sure.</P></BODY></HTML> Thu, 28 Jun 2007 22:47:21 GMT JBDanford2002 2007-06-28T22:47:21Z Pix and vcs (veritas cluster) https://community.cisco.com/t5/network-security/pix-and-vcs-veritas-cluster/m-p/804596#M985677 <P>Is there any special configuration to add on the pix to work with Veritas Cluster.</P><P></P><P>A permit host XXXXX eq 14141 any. </P><P></P><P>Even with this a cannot access the Server. I can access the server with ssh but not with VCS admin console.</P><P></P><P>Is thers any special config for that one??</P><P></P><P>Regards</P> Mon, 11 Mar 2019 10:37:08 GMT https://community.cisco.com/t5/network-security/pix-and-vcs-veritas-cluster/m-p/804596#M985677 f.lemieux 2019-03-11T10:37:08Z Re: Pix and vcs (veritas cluster) https://community.cisco.com/t5/network-security/pix-and-vcs-veritas-cluster/m-p/804597#M985682 <HTML><HEAD></HEAD><BODY><P>Your access-list entry is not correct. Hard to tell what you have really but when applied to a inbound interface the ACL should look like the following:</P><P></P><P>access-list acl_inside permit tcp host c.c.c.c host s.s.s.s eq 14141</P><P></P><P>Looks like you are allowing only traffic sourcing from 14141 rather than destined to. Post a scrubbed config if you still are not sure.</P></BODY></HTML> Thu, 28 Jun 2007 22:47:21 GMT https://community.cisco.com/t5/network-security/pix-and-vcs-veritas-cluster/m-p/804597#M985682 JBDanford2002 2007-06-28T22:47:21Z