topic Access problem. in Network Security https://community.cisco.com/t5/network-security/access-problem/m-p/762371#M986320 <P>Hi,</P><P>Recently I have chnaged my PIX outside interface ip address (10.17.4.14) mask from 255.255.255.240 to 255.255.255.0. </P><P>Then I added an internal server (172.30.158.9) and did a NATing with 10.17.4.15.</P><P>But when the user tyes to access my server with ip address 10.17.4.15, it is not able to access. ping is also bad.</P><P></P><P>Will their be any problem with 10.17.4.15 as this was a broadcast IP before with mask 255.255.255.240.</P><P></P><P>What can be the problem with PIX?</P> Mon, 11 Mar 2019 10:33:54 GMT examples20001 2019-03-11T10:33:54Z Access problem. https://community.cisco.com/t5/network-security/access-problem/m-p/762371#M986320 <P>Hi,</P><P>Recently I have chnaged my PIX outside interface ip address (10.17.4.14) mask from 255.255.255.240 to 255.255.255.0. </P><P>Then I added an internal server (172.30.158.9) and did a NATing with 10.17.4.15.</P><P>But when the user tyes to access my server with ip address 10.17.4.15, it is not able to access. ping is also bad.</P><P></P><P>Will their be any problem with 10.17.4.15 as this was a broadcast IP before with mask 255.255.255.240.</P><P></P><P>What can be the problem with PIX?</P> Mon, 11 Mar 2019 10:33:54 GMT https://community.cisco.com/t5/network-security/access-problem/m-p/762371#M986320 examples20001 2019-03-11T10:33:54Z Re: Access problem. https://community.cisco.com/t5/network-security/access-problem/m-p/762372#M986324 <HTML><HEAD></HEAD><BODY><P>could you post the pix config</P></BODY></HTML> Fri, 22 Jun 2007 10:23:34 GMT https://community.cisco.com/t5/network-security/access-problem/m-p/762372#M986324 JORGE RODRIGUEZ 2007-06-22T10:23:34Z