topic Re: Monitor disk usage using snmp on the IPS 5.1 sensor in Network Security https://community.cisco.com/t5/network-security/monitor-disk-usage-using-snmp-on-the-ips-5-1-sensor/m-p/412747#M98885 <HTML><HEAD></HEAD><BODY><P>Here is the attachment.</P><P></P><P> </P><P></P></BODY></HTML> Tue, 13 Dec 2005 17:38:46 GMT mhellman 2005-12-13T17:38:46Z Monitor disk usage using snmp on the IPS 5.1 sensor https://community.cisco.com/t5/network-security/monitor-disk-usage-using-snmp-on-the-ips-5-1-sensor/m-p/412744#M98879 <P>Hi</P><P></P><P>I was wondering if it is possile to monitor the diskspace on the partitions of the sensor by using the built in snmpd on the IPS 5.1 sensor appliance. When i try to snmpwalk the sensor i cant see the usual net-snmp stuff.</P><P></P><P>The "cisco.ciscoMgmt.ciscoCidsMIB" entries are showing up nicely but they dont give any output concerning the disk in the sensor.</P><P></P><P></P> Sun, 10 Mar 2019 09:47:32 GMT https://community.cisco.com/t5/network-security/monitor-disk-usage-using-snmp-on-the-ips-5-1-sensor/m-p/412744#M98879 r.stahlbrand 2019-03-10T09:47:32Z Re: Monitor disk usage using snmp on the IPS 5.1 sensor https://community.cisco.com/t5/network-security/monitor-disk-usage-using-snmp-on-the-ips-5-1-sensor/m-p/412745#M98882 <HTML><HEAD></HEAD><BODY><P>I believe there must be a CLI way to find out the disk space information on the sensor. Anyone know this command?</P></BODY></HTML> Tue, 13 Dec 2005 15:17:23 GMT https://community.cisco.com/t5/network-security/monitor-disk-usage-using-snmp-on-the-ips-5-1-sensor/m-p/412745#M98882 b.hsu 2005-12-13T15:17:23Z Re: Monitor disk usage using snmp on the IPS 5.1 sensor https://community.cisco.com/t5/network-security/monitor-disk-usage-using-snmp-on-the-ips-5-1-sensor/m-p/412746#M98884 <HTML><HEAD></HEAD><BODY><P>I assume you're talking about scripting this? Probably the easiest thing to do would be to use Curl. I've attached an example. You'll need to change a couple <BRACKETED> values for it to work.</BRACKETED></P><P></P><P>The output is different than what you'd get if you did a "df" using the service account. You'll have to decide which output you require.</P><P></P><P></P></BODY></HTML> Tue, 13 Dec 2005 17:31:45 GMT https://community.cisco.com/t5/network-security/monitor-disk-usage-using-snmp-on-the-ips-5-1-sensor/m-p/412746#M98884 mhellman 2005-12-13T17:31:45Z Re: Monitor disk usage using snmp on the IPS 5.1 sensor https://community.cisco.com/t5/network-security/monitor-disk-usage-using-snmp-on-the-ips-5-1-sensor/m-p/412747#M98885 <HTML><HEAD></HEAD><BODY><P>Here is the attachment.</P><P></P><P> </P><P></P></BODY></HTML> Tue, 13 Dec 2005 17:38:46 GMT https://community.cisco.com/t5/network-security/monitor-disk-usage-using-snmp-on-the-ips-5-1-sensor/m-p/412747#M98885 mhellman 2005-12-13T17:38:46Z