https://community.cisco.com/t5/network-security/promiscuous-port-help/m-p/491711#M98914 <HTML><HEAD></HEAD><BODY><P>The following is the command prompt for configuring promiscuous ports, Switch(config-if)# switchport mode {access |private vlan host | private vlan promiscuous}</P><P></P></BODY></HTML> Tue, 06 Dec 2005 21:29:33 GMT beth-martin 2005-12-06T21:29:33Z https://community.cisco.com/t5/network-security/promiscuous-port-help/m-p/491710#M98912 <P>Hello,</P><P></P><P>We are trying to figure out how to setup a port on our Cat4006 switch to be in promiscuous mode. We already have multiple VLAN's and I have read the details on setting up PVLAN's I am just not sure if this would affect our existing port configuration. We want to setup the one port to add a SNORT box and be able to capture all traffic flowing through the 4006 and VLAN's. Does anyone have some insight?</P><P>Thanks,</P><P>Jeremey</P> Sun, 10 Mar 2019 09:46:49 GMT https://community.cisco.com/t5/network-security/promiscuous-port-help/m-p/491710#M98912 jlawrencedhe 2019-03-10T09:46:49Z https://community.cisco.com/t5/network-security/promiscuous-port-help/m-p/491711#M98914 <HTML><HEAD></HEAD><BODY><P>The following is the command prompt for configuring promiscuous ports, Switch(config-if)# switchport mode {access |private vlan host | private vlan promiscuous}</P><P></P></BODY></HTML> Tue, 06 Dec 2005 21:29:33 GMT https://community.cisco.com/t5/network-security/promiscuous-port-help/m-p/491711#M98914 beth-martin 2005-12-06T21:29:33Z