topic Re: Need additional interface for IDS-4250 in Network Security https://community.cisco.com/t5/network-security/need-additional-interface-for-ids-4250/m-p/427409#M98946 <HTML><HEAD></HEAD><BODY><P>You have found an error in our documentation. This should be corrected in the next version.</P><P></P><P>Thanks!</P><P>-Rusty</P></BODY></HTML> Tue, 15 Nov 2005 14:55:16 GMT rwassom 2005-11-15T14:55:16Z Need additional interface for IDS-4250 https://community.cisco.com/t5/network-security/need-additional-interface-for-ids-4250/m-p/427406#M98941 <P>I need to add an additional interface to my IDS-4250 (Cisco part number IDS-4250-TX-INT). Unfortunately, these parts are now in an "end-of-sale" status as of May 31, 2005. Does anyone know what PCI NIC this part number really is? I'm sure it's just a "normal" NIC (3Com, Intel, etc.) that Cisco was using. Any help would be appreciated.</P> Sun, 10 Mar 2019 09:45:18 GMT https://community.cisco.com/t5/network-security/need-additional-interface-for-ids-4250/m-p/427406#M98941 gpask 2019-03-10T09:45:18Z Re: Need additional interface for IDS-4250 https://community.cisco.com/t5/network-security/need-additional-interface-for-ids-4250/m-p/427407#M98942 <HTML><HEAD></HEAD><BODY><P>You are looking for the wrong part number.</P><P></P><P>The part number you want is: IDS-TX-INT= (10/100/1000Base-TX for IDS 4235, 4250)</P><P>And it is still being sold by Cisco (List price $300).</P><P></P><P>It is only the base chassis IDS-4250-TX-K9 part number that has been End Of Saled in May. </P><P>The optional 10/100/1000 PCI NIC IDS-TX-INT= is still being sold for customers to upgrade their IDS-4250-TX sensors. The primary purpose for selling the additional NIC is to support InLine mode on the IDS-4250-TX sensors.</P><P></P><P>The IDS-TX-INT= can also be used in a IDS-4235 chassis for customers wanting to run InLine mode on their IDS-4235.</P><P></P><P>Because it can be used in both the IDS-4235 and IDS-4250-TX it was decided to not put 4235 or 4250 in the product number.</P><P></P><P>NOTE: IDS-4250-TX-INT is not a valid part number.</P><P></P><P></P><P></P></BODY></HTML> Tue, 15 Nov 2005 04:22:32 GMT https://community.cisco.com/t5/network-security/need-additional-interface-for-ids-4250/m-p/427407#M98942 marcabal 2005-11-15T04:22:32Z Re: Need additional interface for IDS-4250 https://community.cisco.com/t5/network-security/need-additional-interface-for-ids-4250/m-p/427408#M98943 <HTML><HEAD></HEAD><BODY><P>Thank you. I obtained that part number from <A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_module_installation_guide_chapter09186a008043d7bc.html" target="_blank">http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_module_installation_guide_chapter09186a008043d7bc.html</A></P><P></P><P>Here's an excerpt:</P><P></P><P>You can install the following optional PCI cards in IDS-4235 and IDS-4250. The optional PCI cards provide additional sensing interfaces. </P><P></P><P>&#149;TX card (10/100/1000TX sensing interface, part number, IDS-4250-TX-INT=) </P><P></P><P></P><P>I'll pass the part number you provided along to my vendor. Thanks again. I really appreciate the information.</P><P></P><P>Graham</P></BODY></HTML> Tue, 15 Nov 2005 04:48:52 GMT https://community.cisco.com/t5/network-security/need-additional-interface-for-ids-4250/m-p/427408#M98943 gpask 2005-11-15T04:48:52Z Re: Need additional interface for IDS-4250 https://community.cisco.com/t5/network-security/need-additional-interface-for-ids-4250/m-p/427409#M98946 <HTML><HEAD></HEAD><BODY><P>You have found an error in our documentation. This should be corrected in the next version.</P><P></P><P>Thanks!</P><P>-Rusty</P></BODY></HTML> Tue, 15 Nov 2005 14:55:16 GMT https://community.cisco.com/t5/network-security/need-additional-interface-for-ids-4250/m-p/427409#M98946 rwassom 2005-11-15T14:55:16Z