Port redirection Pix 501

scramer13 — Mon, 11 Mar 2019 10:14:48 GMT

I have a pix 501 and am needing to do some port forwarding. I have a DVR (being used for security cameras) it has an internal IP address of 192.168.1.150 I need to have port forwarding setup for 3000 - 3007 and 8800

Is it possible to do this through teh pdm or do I need to do it at command line? I'm at a loss.

Re: Port redirection Pix 501

acomiskey — Tue, 15 May 2007 19:32:33 GMT

Never did it via PDM sorry.

static (inside,outside) tcp interface 3000 192.168.1.150 3000 netmask 255.255.255.255

static (inside,outside) tcp interface 3007 192.168.1.150 3007 netmask 255.255.255.255

static (inside,outside) tcp interface 8800 192.168.1.150 8800 netmask 255.255.255.255

I am assuming you are using outside interface of pix and ports are tcp. Don't forget to allow in your acl as well.

topic Re: Port redirection Pix 501 in Network Security

Port redirection Pix 501

Re: Port redirection Pix 501