topic ASA NAT problem... help me. in Network Security

ASA NAT problem... help me.

shinwoo_acdc77 — Mon, 11 Mar 2019 10:12:32 GMT

why not nat translation ... i don't understand.. please help me

==== config ====

nat (inside1) 1 10.10.10.0 255.255.255.0

nat (inside2) 1 10.10.11.0 255.255.255.0

global (outside) 1 192.168.1.1-192.168.1.100

some PC not connect to outside network

error message :

portmap translation creation failed

asa or pix bug?

Re: ASA NAT problem... help me.

sebastan_bach — Fri, 11 May 2007 09:48:47 GMT

for the number of nat sources ur pool is very small here u can configured dynamic nat. configure pat by specifying a single ip address.

u can also specify the a single ip address after the gobal pool u have specified.

so once the pool is full then the pix will pat the translations on that single ip.

hope this helps

regards

sebastan

Re: ASA NAT problem... help me.

vitripat — Fri, 11 May 2007 09:54:33 GMT

Here's what you need-

global (outside) 1 interface

As pointed out by Sebastan, your global pool seems too small to support both inside networks and hence we need to PAT using the above command. Hope that helps.

Regards,

Vibhor.