topic sfr module will not extract in Network Security

sfr module will not extract

JariW — Tue, 12 Mar 2019 14:14:29 GMT

Hi all

We have got two ASA 5525-x with sfr modules. They lived a couple off years without functioning on version 5.4.0. Now for test whe want to upgrade them with new software. One was easy.. without any error. But the second (did exactly the same) gives an error after he tries to extract the .pkg.

asasfr-boot>system install noconfirm http://xx.xx.xx.xx/asasfr-sys-6.2.3-83.pkg

Verifying

Downloading

Extracting

Unknown error occured

Upgrade aborted

The logfiles gives nothing..

What can it be? Whe suspect the ssd.. but can't check it..

Pls. help..

Re: sfr module will not extract

Sheraz.Salim — Tue, 22 Jan 2019 14:24:14 GMT

the reason for this is because of the link between the sfr and the http where the file is.

try to do ftp instead of http. or make sure the connection is a good link no ping loss etc.

Re: sfr module will not extract

Abheesh Kumar — Tue, 22 Jan 2019 14:24:37 GMT

can you just reboot the module and try to install again.

Re: sfr module will not extract

JariW — Tue, 22 Jan 2019 14:31:39 GMT

Rebooted already.. gives the same error.

I'll try it with ftp..

thx

Re: sfr module will not extract

JariW — Tue, 22 Jan 2019 15:08:31 GMT

Ftp doesn't matter.. same error..

Is it somewhere possible to check the ssd or just change it with an other?

Re: sfr module will not extract

Abheesh Kumar — Tue, 22 Jan 2019 15:12:12 GMT

If you have a spare SSD you can try with that. From the front side of ASA you can remove.

Re: sfr module will not extract

Abheesh Kumar — Tue, 22 Jan 2019 15:13:26 GMT

Is that the same file you copied on to the first ASA. or the same one. Any please verify the MD5 of the file as well.

Re: sfr module will not extract

JariW — Tue, 22 Jan 2019 15:15:56 GMT

It is the same file. I've checked the md5 on the faulte firewall and is correct.

We will try it with a spare ssd.

Thx in advance