topic Re: FP4000 Security Engine Error in Network Security

FP4000 Security Engine Error

fatalXerror — Tue, 12 Mar 2019 14:05:57 GMT

Hi guys, I would like to know if someone already encountered this issue.

My Security engine goes down stating that "thermal-problem"? Currently, i am using just 2x fan, is it because of that? how to check the temperature?

Thanks

Re: FP4000 Security Engine Error

Chess Norris — Mon, 19 Nov 2018 13:56:12 GMT

Hi,

The FMC 4000 is built on UCS server hardware so I think you can check the hardware status from the Cisco Integrated Management Controller. We had an issue with the Firmware before and did the upgrade through CIMC.

Re: FP4000 Security Engine Error

fatalXerror — Mon, 19 Nov 2018 16:55:30 GMT

Hi @Chess Norris, this is FP4110 appliance not FMC4000. May i know how to configure CIMC for the FP4110 appliance? i am only familiar with the UCS c220 m4 models.

Re: FP4000 Security Engine Error

Chess Norris — Mon, 19 Nov 2018 18:18:24 GMT

Ah, I see. As far as I know, the CIMC is only for managing the FMC appliances. For the FTD 4100 I think you could check hardware status either via the chassis manager or through the FXOS CLI. Have a look here https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/fxos221/cli-guide/b_CLI_ConfigGuide_FXOS_221/introduction_to_the_firepower_security_appliance.html