topic Adding interfaces to 4250 in Network Security https://community.cisco.com/t5/network-security/adding-interfaces-to-4250/m-p/585490#M99595 <P>It is documented that 2 4250-SX-INT= can be installed into the 4250. I would like to know which of the following combinations are also supported by 4250: 4250-SX-INT= + IDS-TX-INT=, IDS-TX-INT= + IDS-TX-INT=, 4250-SX-INT= + IDS-XL-INT=, IDS-4FE-INT= + Gigabit PCI card.</P><P></P><P>Thx.</P><P></P> Sun, 10 Mar 2019 09:53:27 GMT ovt 2019-03-10T09:53:27Z Adding interfaces to 4250 https://community.cisco.com/t5/network-security/adding-interfaces-to-4250/m-p/585490#M99595 <P>It is documented that 2 4250-SX-INT= can be installed into the 4250. I would like to know which of the following combinations are also supported by 4250: 4250-SX-INT= + IDS-TX-INT=, IDS-TX-INT= + IDS-TX-INT=, 4250-SX-INT= + IDS-XL-INT=, IDS-4FE-INT= + Gigabit PCI card.</P><P></P><P>Thx.</P><P></P> Sun, 10 Mar 2019 09:53:27 GMT https://community.cisco.com/t5/network-security/adding-interfaces-to-4250/m-p/585490#M99595 ovt 2019-03-10T09:53:27Z Re: Adding interfaces to 4250 https://community.cisco.com/t5/network-security/adding-interfaces-to-4250/m-p/585491#M99624 <HTML><HEAD></HEAD><BODY><P>The 2 4250-SX-INT= cards is the only combination of 2 cards that is supported.</P><P></P><P>This was done specifically for customers who needed inline monitoring on a fiber gig link (requires 2 fiber gig ports), and did not need the speed of the IDS-4250-XL (or could not afford the cost).</P><P></P><P></P></BODY></HTML> Thu, 16 Feb 2006 21:02:43 GMT https://community.cisco.com/t5/network-security/adding-interfaces-to-4250/m-p/585491#M99624 marcabal 2006-02-16T21:02:43Z