https://community.cisco.com/t5/software-defined-access-sd-access/sd-access-rep-support/m-p/4508118#M1617 <P>BUMP</P> Thu, 25 Nov 2021 07:42:41 GMT x00008037 2021-11-25T07:42:41Z https://community.cisco.com/t5/software-defined-access-sd-access/sd-access-rep-support/m-p/4505400#M1615 <P>Has anyone done or know if this type of REP Topology would be supported in SD-Access and DNA-C.</P><P>&nbsp;</P><P>I know the individual REP rings are supported when connected to the same EDGE Node.</P><P>&nbsp;</P><P>but can you stretch the VN/VLAN (Enable Broadcast) across the fabric to the other REP ring to facilitate comm's between the end devices.</P><P>&nbsp;</P><P>Will Industrial Ethernet protocols used on the IE devices in the REP ring be supported traversing the VN/VLAN to communicate with the other REP ring segment.</P> Fri, 19 Nov 2021 07:14:43 GMT https://community.cisco.com/t5/software-defined-access-sd-access/sd-access-rep-support/m-p/4505400#M1615 x00008037 2021-11-19T07:14:43Z https://community.cisco.com/t5/software-defined-access-sd-access/sd-access-rep-support/m-p/4508118#M1617 <P>BUMP</P> Thu, 25 Nov 2021 07:42:41 GMT https://community.cisco.com/t5/software-defined-access-sd-access/sd-access-rep-support/m-p/4508118#M1617 x00008037 2021-11-25T07:42:41Z