topic Re: DNAC and Cat9300 Provisioning error in Software-Defined Access (SD-Access)

DNAC and Cat9300 Provisioning error

Harish Chopra — Sat, 29 Jun 2019 04:52:34 GMT

Error - Unable to push CLI 'ip domain-lookup' to device 10.10.10.20 using protocol ssh2

I am trying to provision the cat 9300 for the first time in DNAC, it is throwing the error related to ip domain-lookup

Device Model - Cat9300-24U
DNA Center version 1.2.10

I have enabled -
Ssh version 2
generated the crypto key

Re: DNAC and Cat9300 Provisioning error

Harish Chopra — Sat, 29 Jun 2019 17:33:15 GMT

Hi, This got resolved after the image was downgraded on the Cat9300. Earlier I installed the latest image - cat9k_iosxe.16.11.01.SPA.bin and this image had bugs which will work with DNAC 1.3 version in the coming release. As of today, the recommendation on the following page was to use 16.09 image. (cat9k_iosxe.16.09.03.SPA.bin) compatibility matrix - https://www.cisco.com/c/en/us/solutions/enterprise-networks/software-defined-access/compatibility-matrix.html After the downgrade, this worked flawless.

Re: DNAC and Cat9300 Provisioning error

Tomas de Leon — Sat, 29 Jun 2019 22:19:47 GMT

16.11.1c for the Catalyst 9300 when using Cisco DNAC version 1.3

https://www.cisco.com/c/en/us/solutions/enterprise-networks/software-defined-access/compatibility-matrix.html