https://community.cisco.com/t5/software-defined-access-sd-access/snmpv3-and-dnac/m-p/5004602#M2951 <P>This is still the case for SNMP traps unfortunately. It only provisions traps with SNMPv2(checked on 2.3.5.5) like described by <a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/316013">@Tomas de Leon</a> here: <A href="https://community.cisco.com/t5/software-defined-access-sd-access/snmpv3-support-for-assurance-telemetry-traps/td-p/3987972" target="_blank">https://community.cisco.com/t5/software-defined-access-sd-access/snmpv3-support-for-assurance-telemetry-traps/td-p/3987972</A></P> Wed, 24 Jan 2024 14:23:39 GMT Torbjørn 2024-01-24T14:23:39Z https://community.cisco.com/t5/software-defined-access-sd-access/snmpv3-and-dnac/m-p/5004411#M2950 <P>Hi Guys,</P> <P>Looking for release notes but can't see any update from a few years ago about needing to use SNMPv2 for traps for telemetry. Can we just use SNMPV3 now for polling/telemetry/traps?</P> <P>Thanks</P> <P>George</P> Wed, 24 Jan 2024 11:47:05 GMT https://community.cisco.com/t5/software-defined-access-sd-access/snmpv3-and-dnac/m-p/5004411#M2950 georgehewittuk1 2024-01-24T11:47:05Z https://community.cisco.com/t5/software-defined-access-sd-access/snmpv3-and-dnac/m-p/5004602#M2951 <P>This is still the case for SNMP traps unfortunately. It only provisions traps with SNMPv2(checked on 2.3.5.5) like described by <a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/316013">@Tomas de Leon</a> here: <A href="https://community.cisco.com/t5/software-defined-access-sd-access/snmpv3-support-for-assurance-telemetry-traps/td-p/3987972" target="_blank">https://community.cisco.com/t5/software-defined-access-sd-access/snmpv3-support-for-assurance-telemetry-traps/td-p/3987972</A></P> Wed, 24 Jan 2024 14:23:39 GMT https://community.cisco.com/t5/software-defined-access-sd-access/snmpv3-and-dnac/m-p/5004602#M2951 Torbjørn 2024-01-24T14:23:39Z