https://community.cisco.com/t5/software-defined-access-sd-access/sda-policy/m-p/5102885#M3284 <P>I want to know if if it is possible to apply the same policy to different SVI in SDA</P><P>SVI 100 =Policy A</P><P>SVI 200 =Policy A</P><P>&nbsp;</P> Sat, 11 May 2024 22:37:39 GMT mouloud 2024-05-11T22:37:39Z https://community.cisco.com/t5/software-defined-access-sd-access/sda-policy/m-p/5102885#M3284 <P>I want to know if if it is possible to apply the same policy to different SVI in SDA</P><P>SVI 100 =Policy A</P><P>SVI 200 =Policy A</P><P>&nbsp;</P> Sat, 11 May 2024 22:37:39 GMT https://community.cisco.com/t5/software-defined-access-sd-access/sda-policy/m-p/5102885#M3284 mouloud 2024-05-11T22:37:39Z https://community.cisco.com/t5/software-defined-access-sd-access/sda-policy/m-p/5102924#M3285 <P>if that is the requirement you can apply, in Sd-Access when you do segmentation we expected vlan to be different segment, so you can have macro/micro segment based on the requirement, if you apply same policy then you have less security.</P> <P>some reference of policy.</P> <P><A href="https://community.cisco.com/t5/security-knowledge-base/policy-provisioning-and-operation-in-sda/ta-p/3712744#toc-hId-1181317416" target="_blank">https://community.cisco.com/t5/security-knowledge-base/policy-provisioning-and-operation-in-sda/ta-p/3712744#toc-hId-1181317416</A></P> Sun, 12 May 2024 07:04:16 GMT https://community.cisco.com/t5/software-defined-access-sd-access/sda-policy/m-p/5102924#M3285 balaji.bandi 2024-05-12T07:04:16Z