topic Re: DNA for Assurance Without ISE in Software-Defined Access (SD-Access)

DNA for Assurance Without ISE

kahmed — Wed, 08 Jan 2020 09:59:13 GMT

Can I use the only the Assurance of the DNA not the Fabric without the ISE for Wired and Wireless ?

The Customer needs to use it as Monitoring only not Fabric and don't need to buy the ISE

Re: DNA for Assurance Without ISE

Mariusz Kazmierski — Wed, 08 Jan 2020 11:01:47 GMT

Hi,

Yes, you can use it.

Regards, Mariusz

Re: DNA for Assurance Without ISE

kahmed — Wed, 08 Jan 2020 11:48:23 GMT

Thanks for your reply

So We will just add all the devices and enable telemetry ?

what about the APs?

Re: DNA for Assurance Without ISE

Mariusz Kazmierski — Wed, 08 Jan 2020 13:51:18 GMT

Hi,

Here you will find a guildeline / workflow how to enable Cisco DNA-Center Assurance, discover devices, etc.:

https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-management/dna-center-assurance/1-3/b_cisco_dna_assurance_1_3_ug/b_cisco_dna_assurance_1_3_ug_chapter_010011.html

Best regards,

Mariusz

Re: DNA for Assurance Without ISE

Dan Rowe — Fri, 10 Jan 2020 19:31:13 GMT

The devices should be configured for assurance automatically when performing a discovery job from DNAC IF device controllability is enabled. If device is discovered without device controllability enabled, you can manually specify and enable the telemetry profile for the device in order to enable assurance.

DNAC integration with ISE for assurance allows us to retrieve additional assurance data for wired clients, not wireless clients.

Re: DNA for Assurance Without ISE

Jaderson Pessoa — Wed, 15 Jan 2020 11:26:28 GMT

Yes you can use it without problem. As far we know ISE we will use in case that you need more control about your environment, in this case only DNAC will help you to automate lot of things, but working together with ISE nice things can happens.
Look this to learn more about: https://digital-learning.cisco.com/#/training-plan/6132