topic Re: 9400 stackwise support for SDA border in Software-Defined Access (SD-Access)

9400 stackwise support for SDA border

Kanan Huseynli — Mon, 03 Aug 2020 19:26:33 GMT

Hi there,

afaik, currently stackwise virtual is not supported for 9400 deployed in SDA. Where can I get info that when it will be supported?

Thanks in advance,

Re: 9400 stackwise support for SDA border

mnagired — Mon, 03 Aug 2020 20:22:21 GMT

Hello Kanan,

Yes, C9400 are still not supported.. It will be supported in one of the upcoming release..

Regards

Mahesh N

Re: 9400 stackwise support for SDA border

hafeezali — Wed, 05 Aug 2020 07:02:26 GMT

Hi, Please check the information related to StackWise support on Cisco Catalyst 9400 for SDA Edge and Border. It is supported with the start of Cisco DNA Center 1.3.3.x. The latest version 1.3.3.6 is updated on July 16, 2020.

https://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/dna-center/nb-06-dna-center-data-sheet-cte-en.html

Customers can now use Cisco DNA Center to manage the StackWise Virtual device, along with monitoring the health and status of StackWise Virtual ports and links.
SVL support has been added on edge and border nodes. Base automation will discover manually configured SVL devices. The user can configure fabric roles such as edge/border or border + edge (B+E).
Base automation (inventory, discovery, SWIM, topology, template programmer) and assurance support for Cisco Catalyst 9500 and 9400 Series StackWise Virtual switches.

Re: 9400 stackwise support for SDA border

Kanan Huseynli — Wed, 05 Aug 2020 11:06:10 GMT

That' is great info!

So, if you use not as FIAB or B+C then we can do SVL ,right?

In current case we will need additional Control node, if we want to deploy 9400 as SVL in SDA.

Regards,

Re: 9400 stackwise support for SDA border

mnagired — Thu, 06 Aug 2020 18:33:03 GMT

Hello Kanan

C9400 SVL as Border/Control, Edge, FIAB is all part of upcoming release and this is the latest. .. Only C9500 SVL was supported in 1.3.3.x..

Regards

Mahesh

Re: 9400 stackwise support for SDA border

Kanan Huseynli — Fri, 07 Aug 2020 08:24:54 GMT

Hi mnagired,

what confused me in above mentioned link:

SVL support has been added on edge and border nodes. Base automation will discover manually configured SVL devices. The user can configure fabric roles such as edge/border or border + edge (B+E).

So, by word, if we do manual SVL and give B or E or B&E role to node, it should work, shouldn't it?