https://community.cisco.com/t5/security-analytics/snmp-oids/m-p/4291772#M634 <P>maybe try below OID ( parent one see if you get any information usefull ?)</P> <P>&nbsp;</P> <P>Get signal Strength</P> <P>.1.3.6.1.4.1.9.9.661.1.3.4.1.1.1.18</P> <P>Get phone #</P> <P>.1.3.6.1.4.1.9.9.661.1.3.1.1.4.18</P> <P>Get SIM</P> <P>.1.3.6.1.4.1.9.9.661.1.3.1.1.3.18</P> <P>Get IMEI</P> <P>.1.3.6.1.4.1.9.9.661.1.3.1.1.2.18</P> <P>Roaming status</P> <P>.1.3.6.1.4.1.9.9.661.1.1.1.6.18</P> Mon, 15 Feb 2021 13:06:09 GMT balaji.bandi 2021-02-15T13:06:09Z https://community.cisco.com/t5/security-analytics/snmp-oids/m-p/4291757#M633 <P>Dear Cisco Support,&nbsp;</P><P>&nbsp;</P><P>I want to setup the following monitoring : for Modem and SIM card for the following commands :&nbsp;</P><P>&nbsp;</P><UL><LI>Sh cell 0/1/0 security (SIM Status = xxx)</LI><LI>Sh cell 0/2/0 security (SIM Status = xxx)</LI><LI>Sh cell 0/1/0 hardware (Modem Status = xxx)</LI><LI>Sh cell 0/2/0 hardware (Modem Status = xxx)</LI></UL><P>Is it possible ? If yes, please let me know.&nbsp;</P><P>&nbsp;</P><P>Thank you&nbsp;</P><P>Regards</P><P>&nbsp;</P> Mon, 15 Feb 2021 12:27:44 GMT https://community.cisco.com/t5/security-analytics/snmp-oids/m-p/4291757#M633 lydiahricova 2021-02-15T12:27:44Z https://community.cisco.com/t5/security-analytics/snmp-oids/m-p/4291772#M634 <P>maybe try below OID ( parent one see if you get any information usefull ?)</P> <P>&nbsp;</P> <P>Get signal Strength</P> <P>.1.3.6.1.4.1.9.9.661.1.3.4.1.1.1.18</P> <P>Get phone #</P> <P>.1.3.6.1.4.1.9.9.661.1.3.1.1.4.18</P> <P>Get SIM</P> <P>.1.3.6.1.4.1.9.9.661.1.3.1.1.3.18</P> <P>Get IMEI</P> <P>.1.3.6.1.4.1.9.9.661.1.3.1.1.2.18</P> <P>Roaming status</P> <P>.1.3.6.1.4.1.9.9.661.1.1.1.6.18</P> Mon, 15 Feb 2021 13:06:09 GMT https://community.cisco.com/t5/security-analytics/snmp-oids/m-p/4291772#M634 balaji.bandi 2021-02-15T13:06:09Z