https://community.cisco.com/t5/telepresence-and-video-infrastructure/sip-participant-label-manipulation/m-p/5018333#M106325 <P>it is a new requirement for me, however, I think you can create one SIP normalized script, and at this script make a rule to remove the SIP URI and keep only the DN , then apply it to the SIP trunk between CUCM and CMS.</P> Wed, 14 Feb 2024 16:38:33 GMT Mohamed H. Abdelmotaleb 2024-02-14T16:38:33Z https://community.cisco.com/t5/telepresence-and-video-infrastructure/sip-participant-label-manipulation/m-p/5018324#M106324 <P>When an IP Phone joins the cisco meeting server (meet-me) the name shows as DN@COMPANY.COM<BR />Is it possible to manipulate the label to just show the DN only.</P> Wed, 14 Feb 2024 16:30:04 GMT https://community.cisco.com/t5/telepresence-and-video-infrastructure/sip-participant-label-manipulation/m-p/5018324#M106324 Asim Abdulla 2024-02-14T16:30:04Z https://community.cisco.com/t5/telepresence-and-video-infrastructure/sip-participant-label-manipulation/m-p/5018333#M106325 <P>it is a new requirement for me, however, I think you can create one SIP normalized script, and at this script make a rule to remove the SIP URI and keep only the DN , then apply it to the SIP trunk between CUCM and CMS.</P> Wed, 14 Feb 2024 16:38:33 GMT https://community.cisco.com/t5/telepresence-and-video-infrastructure/sip-participant-label-manipulation/m-p/5018333#M106325 Mohamed H. Abdelmotaleb 2024-02-14T16:38:33Z