topic Re: unity networking in Unified Communications Infrastructure

unity networking

annayuzhao — Mon, 18 Mar 2019 21:56:53 GMT

Scenario like this:

Two CCM clusters A and B. Cluster A has two CCMs located physically in two cities. Each of then has a Unity connected. The unities are not failover.

The cluster B has only one CCM in city C. It also has one Unity. These three unity servers are in the same AD. In order to do networking between them, should I create two remote delivery locations on each unity? Thanks

Re: unity networking

lindborg — Tue, 04 May 2004 20:43:18 GMT

If they're in the same AD forrest then you don't need to create remote locations (that's only necessary for doing blind addressing or the like across systems that aren't on the network). Check ou the Unity networking guide for 4.0(3) for more details on how Unity servers on the same directory share information:

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_installation_and_configuration_guide_book09186a00801ba396.html

Re: unity networking

ciscoforum — Wed, 05 May 2004 23:54:06 GMT

so if all the unity servers are in the same AD, we call this Digital networking and no remote locatiton is necessary. Remote delivery location is only needed for SMTP, AMIS etc. Right?

Re: unity networking

kechambe — Thu, 06 May 2004 00:58:59 GMT

Correct. Only for AMIS, SMTP, VPIM and OctelNet.

Thanks,

Keith