CUCM subscriber installation fails

kingvoice — Tue, 19 Mar 2019 18:00:51 GMT

Hello Experts ;

I am getting below error while installing CM subscriber .NTP IS OK , I make router to resolve Publisher name since no dns server,but i dont know why i am getting this error.

Try disabling the LRO option

Venkatesh Perumal — Tue, 19 Apr 2016 22:16:19 GMT

Try disabling the LRO option in the ESXi host configuration followed by ESXi host reboot. refer below doc for the same.

https://supportforums.cisco.com/document/95886/disable-lro-ucs-uc-application-deployments

http://docwiki.cisco.com/wiki/Disable_LRO

Also refer the below Bug: CSCur94973 and Contact Cisco TAC if disabling the LRO doesn't help.

Symptom:
Upgrade times out with the error:

Command "/opt/cisco/install/bin/pmNormalizeGeneric /etc/opt/cisco/install/component_install_cmd_list" has exceeded timed threshold of 3600 seconds

Conditions:
Migration from 6.1(5)/7.x/8.x/9.x/10.0(1)/10.5(1) to 10.5(2)

Workaround:
Disable the VM's ntp sync with the ESXi host using the workaround mentioned in the below link:http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1189
Alternate workaround would be to configure ESXi server & CUCM publisher to point to same NTP server.

Further Problem Description:
Due to the symptoms, we see upgrade failures.

https://supportforums.cisco.com/discussion/12879341/installation-cuc-110120000-2-failed

https://supportforums.cisco.com/discussion/12386081/installation-fails-cucm-subscriber-105-exceeds-3600-seconds-limit

https://supportforums.cisco.com/discussion/11267446/install-cucm-86110000-43-vmware-fails-installing-progmeter

Simply disable the LRO

Deepak Rawat — Wed, 20 Apr 2016 04:54:48 GMT

Simply disable the LRO settings followed by the ESXi reboot and that should be good enough to take care of this issue.

Regards

Deepak

topic Try disabling the LRO option in Unified Communications Infrastructure

CUCM subscriber installation fails

Try disabling the LRO option

Simply disable the LRO