topic I have attached the output of in Unified Communications Infrastructure

MWI issues with CME/CUE SIP integration

bkhanal1971 — Tue, 19 Mar 2019 17:27:31 GMT

I have CME 10.5 and CUC 10.5,newly installed. Everything seems to be working fine except that the MWI is not working. I have MWI turned on in each DNs as well as voicemail pilot number in the voice register global. I also created a dialpeer.

I have done the required work in telephony integration related in the CUC including ports, port groups etc. There are a few ports that are configured for MWIs. Everything looks ok but still MWI is not working. Voicemails are there in the test mailboxes.

Not knowing what went wrong, I decided to post here. If somebody could give me the checklist where I should be looking to resolve this issue,that would be great.

Thanks, Khanal

With debug ccsip messages,

Vivek Batra — Fri, 04 Dec 2015 15:09:48 GMT

With debug ccsip messages, can you see notify message from cuc?

Did you configure mwi unsolicited command under sip-ua mode?

- Vivek

I have mwi-server ipv4:......

bkhanal1971 — Fri, 04 Dec 2015 15:25:09 GMT

I have mwi-server ipv4:........unsolicited command under sip-ua

I haven't done the ccsip messages debug yet but i will see if I can find something from the output.

Thank you Vivek.

I have attached the output of

bkhanal1971 — Fri, 04 Dec 2015 15:40:09 GMT

I have attached the output of debug ccsip pmessages. Looks like MWI is working but neither I see the light turned or or the voicemail icon. Any help would be a great help.

Thanks, Khanal

I can see notify coming from

Vivek Batra — Fri, 04 Dec 2015 15:47:55 GMT

I can see notify coming from cuc but there is no 200 OK from CME.

Can you check cuc ip address is correct in mwi command? You can also verify the SIP bind interface is correct and that is where cuc should be sending notify.

- Vivek

Hi Vivek,

bkhanal1971 — Mon, 07 Dec 2015 17:49:06 GMT

Hi Vivek,

Everything looks good in terms of configuration per your advise. I have used subinterface for sip bind

such as:

bind control source-int gig1/0/1.32

bind media source-int gig1/0/1.32

And the CUC ip address is correct in mwi command

and MWI config lines looks like this:

sip-ua

timers buffer-invite 800

mwi-server ipv4:x.x.x.x (CUC ip) expires 3600 port 5060 transport tcp unsolicited.

My problem still remains as it is.

Hi,

Vivek Batra — Tue, 08 Dec 2015 06:41:50 GMT

Hi,

I can't see any issue with the configuration you've provided so far and it should simply work. Can you please share the ouput of show run to identify further?

- Vivek

Hi Vivek: Here is the

bkhanal1971 — Tue, 08 Dec 2015 13:58:12 GMT

Hi Vivek: Here is the relevant portion of show run command. I even tried sccp integration and when i fired "mwi relay" i got the error that says "Problem starting mwi application"

I can't figure out any issue

Vivek Batra — Wed, 09 Dec 2015 09:30:38 GMT

I can't figure out any issue with the configuration. I suggest you to check with TAC unless any of my friend here has to say on this.

- Vivek

I got it working finally. I

bkhanal1971 — Wed, 09 Dec 2015 20:01:49 GMT

I got it working finally. I had to eliminate long string of parameters for mwi-server command and just put mwi-server ipv4:ip unsolicited and mwi lights are on now. Thank for all your help Vivek.

Thanks

Thanks for updating the

Vivek Batra — Thu, 10 Dec 2015 04:09:01 GMT

Thanks for updating the results Khanal.

- Vivek

Hello

asotojimenezz — Tue, 26 Jul 2016 18:48:37 GMT

Hello

I have the same error

You can check that I wrong ??

I have days without success =(

Regards.

just put "mwi-server ipv4

bkhanal1971 — Tue, 26 Jul 2016 19:41:15 GMT

just put "mwi-server ipv4:address unsolicited" under sip-ua and see if that helps.

Hello

asotojimenezz — Wed, 27 Jul 2016 04:18:03 GMT

Hello

He removed the command

sip-ua

no mwi-server ipv4:172.16.1.2 expires 3600 port 5060 transport udp unsolicited or

no sip-ua

I place

mwi-server ipv4:172.16.1.2 unsolicited

but it still appeared in settings

sip-ua

mwi-server ipv4:172.16.1.2 expires 3600 port 5060 transport udp unsolicited

Because I still appears ??

As he put it correctly ??

Regards.

Re: Hi Vivek,

tyoungbauer — Wed, 04 Oct 2017 17:46:38 GMT

Hi,

I know this is very old but I am having the same issue. I wonder if anyone can help. I have tried all three methods. I can dial the MWI number and the ext and light and unlight the phone, but the trace doesn't show the sip number including the MWI prefix.

I am running CME and CUE n a UC500 with 8.6.5 code.

Sent:

INVITE sip:1000@10.200.11.251:5060 SIP/2.0

Via: SIP/2.0/UDP 10.200.11.250:5060;branch=z9hG4bK1A12614

Remote-Party-ID: <sip:1205@10.200.11.250>;party=calling;screen=no;privacy=off

From: <sip:1205@10.200.11.250>;tag=345B36C-50E

To: <sip:1000@10.200.11.251>

Date: Wed, 04 Oct 2017 17:37:16 GMT

Call-ID: 7FD859DF-A86111E7-8AFC940B-57223D2B@10.200.11.250

Supported: 100rel,timer,resource-priority,replaces,sdp-anat

Min-SE: 1800

Cisco-Guid: 2144845239-2824933863-2331546635-1461861675

User-Agent: Cisco-SIPGateway/IOS-12.x

Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER

CSeq: 101 INVITE

Max-Forwards: 70

Timestamp: 1507138636

Contact: <sip:1205@10.200.11.250:5060>

Diversion: <sip:1205@10.200.11.250>;privacy=off;reason=no-answer;counter=1;screen=no

Expires: 180

Allow-Events: telephone-event

Content-Type: application/sdp

Content-Disposition: session;handling=required

Content-Length: 249

v=0

o=CiscoSystemsSIP-GW-UserAgent 414 5984 IN IP4 10.200.11.250

s=SIP Call

c=IN IP4 10.200.11.250

t=0 0

m=audio 18782 RTP/AVP 0 101

c=IN IP4 10.200.11.250

a=rtpmap:0 PCMU/8000

a=rtpmap:101 telephone-event/8000

a=fmtp:101 0-16

a=ptime:20

000668: //950/7FD7BDB78AF8/SIP/Msg/ccsipDisplayMsg:

Sent:

INVITE sip:1000@10.200.11.251:5060 SIP/2.0

Via: SIP/2.0/UDP 10.200.11.250:5060;branch=z9hG4bK1A12614

Remote-Party-ID: <sip:1205@10.200.11.250>;party=calling;screen=no;privacy=off

From: <sip:1205@10.200.11.250>;tag=345B36C-50E

To: <sip:1000@10.200.11.251>

Date: Wed, 04 Oct 2017 17:37:17 GMT

Call-ID: 7FD859DF-A86111E7-8AFC940B-57223D2B@10.200.11.250

Supported: 100rel,timer,resource-priority,replaces,sdp-anat

Min-SE: 1800

Cisco-Guid: 2144845239-2824933863-2331546635-1461861675

User-Agent: Cisco-SIPGateway/IOS-12.x

Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER

CSeq: 101 INVITE

Max-Forwards: 70

Timestamp: 1507138637

Contact: <sip:1205@10.200.11.250:5060>

Diversion: <sip:1205@10.200.11.250>;privacy=off;reason=no-answer;counter=1;screen=no

Expires: 180

Allow-Events: telephone-event

Content-Type: application/sdp

Content-Disposition: session;handling=required

Content-Length: 249

v=0

o=CiscoSystemsSIP-GW-UserAgent 414 5984 IN IP4 10.200.11.250

s=SIP Call

c=IN IP4 10.200.11.250

t=0 0

m=audio 18782 RTP/AVP 0 101

c=IN IP4 10.200.11.250

a=rtpmap:0 PCMU/8000

a=rtpmap:101 telephone-event/8000

a=fmtp:101 0-16

a=ptime:20

000669: //950/7FD7BDB78AF8/SIP/Msg/ccsipDisplayMsg:

Received:

SIP/2.0 100 Trying

Via: SIP/2.0/UDP 10.200.11.250:5060;branch=z9hG4bK1A12614

To: <sip:1000@10.200.11.251>

From: <sip:1205@10.200.11.250>;tag=345B36C-50E

Call-ID: 7FD859DF-A86111E7-8AFC940B-57223D2B@10.200.11.250

CSeq: 101 INVITE

Content-Length: 0

Timestamp: 1507138637

000670: //950/7FD7BDB78AF8/SIP/Msg/ccsipDisplayMsg:

Received:

SIP/2.0 180 Ringing

Via: SIP/2.0/UDP 10.200.11.250:5060;branch=z9hG4bK1A12614

To: <sip:1000@10.200.11.251>;tag=ds218b77f7

From: <sip:1205@10.200.11.250>;tag=345B36C-50E

Call-ID: 7FD859DF-A86111E7-8AFC940B-57223D2B@10.200.11.250

CSeq: 101 INVITE

Content-Length: 0

Contact: <sip:1000@10.200.11.251:5060;transport=udp>

Allow: INVITE, BYE, CANCEL, ACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO

Cisco-Gcid: 7FD859DF-A86111E7-8AFC940B-57223D2B@10.200.11.250

000671: //950/7FD7BDB78AF8/SIP/Msg/ccsipDisplayMsg:

Received:

SIP/2.0 200 Ok

Via: SIP/2.0/UDP 10.200.11.250:5060;branch=z9hG4bK1A12614

To: <sip:1000@10.200.11.251>;tag=ds218b77f7

From: <sip:1205@10.200.11.250>;tag=345B36C-50E

Call-ID: 7FD859DF-A86111E7-8AFC940B-57223D2B@10.200.11.250

CSeq: 101 INVITE

Content-Length: 133

Contact: <sip:1000@10.200.11.251:5060;transport=udp>

Content-Type: application/sdp

Call-Info: <sip:10.200.11.251:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"

Allow-Events: telephone-event

Allow: INVITE, BYE, CANCEL, ACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO

Cisco-Gcid: 7FD859DF-A86111E7-8AFC940B-57223D2B@10.200.11.250

v=0

o=CUE 7769615 2 IN IP4 10.200.11.251

s=SIP Call

c=IN IP4 10.200.11.251

t=0 0

m=audio 21116 RTP/AVP 0

a=rtpmap:0 PCMU/8000

000672: //950/7FD7BDB78AF8/SIP/Msg/ccsipDisplayMsg:

Sent:

ACK sip:1000@10.200.11.251:5060;transport=udp SIP/2.0

Via: SIP/2.0/UDP 10.200.11.250:5060;branch=z9hG4bK1A272E

From: <sip:1205@10.200.11.250>;tag=345B36C-50E

To: <sip:1000@10.200.11.251>;tag=ds218b77f7

Date: Wed, 04 Oct 2017 17:37:17 GMT

Call-ID: 7FD859DF-A86111E7-8AFC940B-57223D2B@10.200.11.250

Max-Forwards: 70

CSeq: 101 ACK

Allow-Events: telephone-event

Content-Length: 0

000673: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:

Received:

SUBSCRIBE sip:1205@10.200.11.250:5060 SIP/2.0

Via: SIP/2.0/UDP 10.200.11.251:5060;branch=z9hG4bKGtM1eiuZu4D04FJQaYGdGw~~273

Max-Forwards: 70

To: <sip:1205@10.200.11.250>

From: <sip:1000@10.200.11.251>;tag=ds218b77f7

Call-ID: 7FD859DF-A86111E7-8AFC940B-57223D2B@10.200.11.250

CSeq: 1 SUBSCRIBE

Content-Length: 0

Contact: <sip:1000@10.200.11.251:5060;transport=udp>

Expires: 3600

Event: telephone-event

000674: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:

Sent:

SIP/2.0 200 OK

Via: SIP/2.0/UDP 10.200.11.251:5060;branch=z9hG4bKGtM1eiuZu4D04FJQaYGdGw~~273

From: <sip:1000@10.200.11.251>;tag=ds218b77f7

To: <sip:1205@10.200.11.250>;tag=345B36C-50E

Date: Wed, 04 Oct 2017 17:37:17 GMT

Call-ID: 7FD859DF-A86111E7-8AFC940B-57223D2B@10.200.11.250

CSeq: 1 SUBSCRIBE

Content-Length: 0

Contact: <sip:1205@10.200.11.250:5060>

Expires: 3600

000675: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:

Sent:

NOTIFY sip:1000@10.200.11.251:5060;transport=udp SIP/2.0

Via: SIP/2.0/UDP 10.200.11.250:5060;branch=z9hG4bK1A31A2

From: <sip:1205@10.200.11.250>;tag=345B36C-50E

To: <sip:1000@10.200.11.251>;tag=ds218b77f7

Call-ID: 7FD859DF-A86111E7-8AFC940B-57223D2B@10.200.11.250

CSeq: 102 NOTIFY

Max-Forwards: 70

Date: Wed, 04 Oct 2017 17:37:17 GMT

User-Agent: Cisco-SIPGateway/IOS-12.x

Event: telephone-event

Subscription-State: active

Contact: <sip:1205@10.200.11.250:5060>

Content-Length: 0

000676: //0/000000000000/SIP/Msg/ccsipDisplayMsg:

Received:

SIP/2.0 200 Ok

Via: SIP/2.0/UDP 10.200.11.250:5060;branch=z9hG4bK1A31A2

To: <sip:1000@10.200.11.251>;tag=ds218b77f7

From: <sip:1205@10.200.11.250>;tag=345B36C-50E

Call-ID: 7FD859DF-A86111E7-8AFC940B-57223D2B@10.200.11.250

CSeq: 102 NOTIFY

Content-Length: 0

Allow-Events: refer

Allow-Events: message-summary

Allow-Events: telephone-event

000677: //950/7FD7BDB78AF8/SIP/Msg/ccsipDisplayMsg:

Sent:

BYE sip:1000@10.200.11.251:5060;transport=udp SIP/2.0

Via: SIP/2.0/UDP 10.200.11.250:5060;branch=z9hG4bK1A41A90

From: <sip:1205@10.200.11.250>;tag=345B36C-50E

To: <sip:1000@10.200.11.251>;tag=ds218b77f7

Date: Wed, 04 Oct 2017 17:37:17 GMT

Call-ID: 7FD859DF-A86111E7-8AFC940B-57223D2B@10.200.11.250

User-Agent: Cisco-SIPGateway/IOS-12.x

Max-Forwards: 70

Timestamp: 1507138651

CSeq: 103 BYE

Reason: Q.850;cause=16

P-RTP-Stat: PS=715,OS=114400,PR=617,OR=98243,PL=0,JI=0,LA=0,DU=14

Content-Length: 0

000678: //950/7FD7BDB78AF8/SIP/Msg/ccsipDisplayMsg:

Received:

SIP/2.0 200 Ok

Via: SIP/2.0/UDP 10.200.11.250:5060;branch=z9hG4bK1A41A90

To: <sip:1000@10.200.11.251>;tag=ds218b77f7

From: <sip:1205@10.200.11.250>;tag=345B36C-50E

Call-ID: 7FD859DF-A86111E7-8AFC940B-57223D2B@10.200.11.250

CSeq: 103 BYE

Content-Length: 0

000679: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:

Sent:

NOTIFY sip:1000@10.200.11.251:5060;transport=udp SIP/2.0

Via: SIP/2.0/UDP 10.200.11.250:5060;branch=z9hG4bK1A5D2E

From: <sip:1205@10.200.11.250>;tag=345B36C-50E

To: <sip:1000@10.200.11.251>;tag=ds218b77f7

Call-ID: 7FD859DF-A86111E7-8AFC940B-57223D2B@10.200.11.250

CSeq: 104 NOTIFY

Max-Forwards: 70

Date: Wed, 04 Oct 2017 17:37:31 GMT

User-Agent: Cisco-SIPGateway/IOS-12.x

Event: telephone-event

Subscription-State: terminated

Contact: <sip:1205@10.200.11.250:5060>

Content-Length: 0

000680: //0/000000000000/SIP/Msg/ccsipDisplayMsg:

Received:

SIP/2.0 200 Ok

Via: SIP/2.0/UDP 10.200.11.250:5060;branch=z9hG4bK1A5D2E

To: <sip:1000@10.200.11.251>;tag=ds218b77f7

From: <sip:1205@10.200.11.250>;tag=345B36C-50E

Call-ID: 7FD859DF-A86111E7-8AFC940B-57223D2B@10.200.11.250

CSeq: 104 NOTIFY

Content-Length: 0

Allow-Events: refer

Allow-Events: message-summary

Allow-Events: telephone-event

Thanks

Todd