topic Need Help - cucm 6.0.1.2000-3 version - License PAK in Unified Communications Infrastructure

Need Help - cucm 6.0.1.2000-3 version - License PAK

nasirbh78 — Tue, 19 Mar 2019 14:41:49 GMT

Dear All;

How i can extract license PAK file from cucm 6.0.1.2000-3 version ?

Please assist me in this regard.

Need Help - cucm 6.0.1.2000-3 version - License PAK

Jaime Valencia — Mon, 30 Dec 2013 16:16:35 GMT

You can't CUCM knows nothing about PAKs or any kind of ordering numbers, all CUCM knows is about the License files you install on it.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

Need Help - cucm 6.0.1.2000-3 version - License PAK

nasirbh78 — Tue, 31 Dec 2013 10:59:58 GMT

Hi;

I am going to reinstall cucm on same hardware but i dont have the licence so how i can extract the file file from existing cucm and can reuse it for fresh installation thats what i meant.

Need Help - cucm 6.0.1.2000-3 version - License PAK

Manish Gogna — Fri, 03 Jan 2014 07:45:51 GMT

Hi Muhammad,

If you don't have the original license files saved somewhere then you need to contact licensing team of Cisco TAC to get the license files based on the mac address of the Publisher.

HTH

Manish

Need Help - cucm 6.0.1.2000-3 version - License PAK

nasirbh78 — Fri, 03 Jan 2014 14:33:58 GMT

HI MANISH;

THERE IS A WAY TO EXTRACT LICENSE FILE VIA CLI COMMAND. THE SAME THING DID BY MY FRIEND THEREFORE I ASKED...

Need Help - cucm 6.0.1.2000-3 version - License PAK

Manish Gogna — Fri, 03 Jan 2014 16:46:32 GMT

I'll be glad if someone on the forum can enlighten me about the same.

Manish

Need Help - cucm 6.0.1.2000-3 version - License PAK

Rob Huffman — Fri, 03 Jan 2014 17:10:56 GMT

Hi Manish,

I don't believe this command was added until CUCM 7.1 or maybe

the latter 6.1 versions

file get

This command sends the file to another system through SFTP.

Command syntax

file get

activelog directory/filename [reltime] [abstime] [match] [recurs]

inactivelog directory/filename [reltime] [abstime] [match] [recurs]

install directory/filename [reltime] [abstime] [match] [recurs]

license filename [reltime] [abstime] [match] [recurs] [compress]

partBsalog directory/filename [reltime] [abstime] [match] [recurs]

salog directory/filename [reltime] [abstime] [match] [recurs]

tftp directory/filename [reltime] [abstime] [match] [recurs]

Parameters

•activelog specifies a log on the active side.

•inactivelog specifies a log on the inactive side.

•install specifies an installation log.

•license specifies license file.

•partBsalog specifies the partBsalog log directory.

•salog specifies the salog log directory.

•tftp specifies a TFTP file.

•directory/filename specifies the path to the file or files to delete. You can use the wildcard character, *, for filename as long as it resolves to one file.

Options

•abstime—Absolute time period, specified as hh:mm:MM/DD/YY hh:mm:MM/DD/YY

•reltime—Relative time period, specified as minutes | hours | days | weeks | months value

•match—Match a particular string in the filename, specified as string value

•recurs—Get all files, including subdirectories

•compress—Transfer files as compressed file

Usage Guidelines

After the command identifies the specified files, you get prompted to enter an SFTP host, username, and password.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

Examples

This command gets all files in the activelog operating system directory that match the string "plat."

admin: file get activelog platform match plat

This command gets all operating system log files for a particular time period.

admin: file get activelog platform/log abstime 18:00:10/20/13 18:00:10/21/13

Need 'file list license' and 'file get license' commands

CSCsw17906

Cheers!

Rob

"When it comes to luck you make your own "

- Springsteen

Need Help - cucm 6.0.1.2000-3 version - License PAK

Manish Gogna — Fri, 03 Jan 2014 17:39:53 GMT

Nice info Rob [+5] . So, on the 6.0.X version this option to download license files from CLI is not available.

Manish

Re: Need Help - cucm 6.0.1.2000-3 version - License PAK

Rob Huffman — Fri, 03 Jan 2014 17:50:35 GMT

Hi Manish,

Sorry forgot to give you +5 for your correct info . This command was not

available in CUCM 6.0. As you can see here it wasn't in 7.0 either;

file get

This command sends the file to another system by using SFTP.

Command Syntax

file get

activelog directory/filename [reltime] [abstime] [match] [recurs]

inactivelog directory/filename [reltime] [abstime] [match] [recurs]

install directory/filename [reltime] [abstime] [match] [recurs]

partBsalog directory/filename [reltime] [abstime] [match] [recurs]

salog directory/filename [reltime] [abstime] [match] [recurs]

tftp directory/filename [reltime] [abstime] [match] [recurs]

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cli_ref/7_0_1/cli_ref.html#wp39648

Cheers!

Rob

"When it comes to luck you make your own "

- Springsteen