topic CUCM upgrade from 7.1.5 to 10.5.1.10000-7 in Unified Communications Infrastructure

CUCM upgrade from 7.1.5 to 10.5.1.10000-7

abeebvm — Tue, 19 Mar 2019 15:46:29 GMT

Is it possible to do the migration from 7.1.5 to 10.5.1.10000-7 which we are doing for jump upgrade from 7.1.5 to 9.1.2.

The reason why I preferred because this jump upgrade we can achieve in isolated network.

In that case can anybody please help to get specific document for that. Kindly have a look on this case.

Regards,

Abi

You can use prime

Ayodeji Okanlawon — Thu, 23 Oct 2014 09:43:42 GMT

You can use prime collaboration deployment. PCD will do your upgrade and migration without doing any jump upgrade or intermediate upgrade..

Please refer to the vide below.

https://www.youtube.com/watch?v=JzG4kz1_hL4

All upgrade documentation are available on cisco. Take some time and look at the CUCM 10.5 upgrade document

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100.html

Hi Abi,why to go for Jump

Aman Soi — Thu, 23 Oct 2014 09:49:37 GMT

Hi Abi,

why to go for Jump upgrade when PCD is available .

You can also do upgrade if using same IP addresses in Non-Production/offline.

http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/118318-config-cucm-00.html

regds,

aman

Thanks Mr.Ayodeji for your

abeebvm — Thu, 23 Oct 2014 09:53:42 GMT

Thanks Mr.Ayodeji for your prompt reply. I will check the video.

In isolated upgrade zero down time. But in PCD there is some down time expected.

What is the down time in PCD?

Ayodeji Okanlawon — Thu, 23 Oct 2014 09:56:51 GMT

What is the down time in PCD? PCD will be doing a migration from your current hardware platform to a virtual environment. The upgrade/migration is not happening on the same platform. I am not sure where the down time is.

Hi Can you share the video to

juankcs85 — Thu, 19 Feb 2015 15:40:27 GMT

Can you share the video to me?

Thanks.

https://www.youtube.com/watch

Ayodeji Okanlawon — Fri, 20 Feb 2015 14:57:44 GMT

https://www.youtube.com/watch?v=nMrS0hMES7A

Or just go to youtube and search for cisco PCD

Thanks for the video, I have

Wilson Samuel — Mon, 23 Feb 2015 11:51:10 GMT

Thanks for the video, I have never thought of or used PCD before, but I will try here after.