topic Please be aware that by in Unified Communications Infrastructure

Help me !! about AA transfer in unity connection

gssnettech — Tue, 19 Mar 2019 08:49:18 GMT

Dear all

I have an question , our customer has some IPT device in their office .

One unity connection

two Unified Callmanager

two srst Router

I created two auto attendant handle in unity connection,the external user call an pstn number then the AA Answered pls dial extension no or dial 0 for operator ,then the user dial extension number , the AA answer means "the system not found you request number" but the internal user can call any internal number , who can explain this problem?

thanks a lot

Best Rgd

Re: Help me !! about AA transfer in unity connection

Jaime Valencia — Wed, 27 Oct 2010 19:07:43 GMT

Are the VM ports able to reach the DN you want?

Is the DN you're dialing already configured in CUC?

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

Re: Help me !! about AA transfer in unity connection

scheived — Wed, 27 Oct 2010 19:15:05 GMT

I'm not sure about connection but on Unified Unity a caller can only dial an ext to a subscriber already on the system.

Re: Help me !! about AA transfer in unity connection

Jaime Valencia — Wed, 27 Oct 2010 19:37:27 GMT

Depending on the CUC version you can dial just DNs from CUC or anything.

This checkbox allows this:

Allow Transfers to Numbers Not Associated with Users or Call Handlers

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

Re: Help me !! about AA transfer in unity connection

gssnettech — Thu, 28 Oct 2010 04:13:35 GMT

Hi javalenc

thanks for your quickly reply

I already resolve that problem

we found some useful information Except "Allow Transfers to Numbers Not Associated with Users or Call Handlers" You must config system call handlers as follow

With Unity Connection 7. You can follow these steps to allow opening greeting call handler to transfer the call to extension which is not unity subscriber:
- Access System Call Handlers >> Opening Greeting Call Handler >> Edit >> Greetings >> Standard >> Check the check-box "Allow Transfers to Numbers Not Associated with Users or Call Handlers"

- System Settings >> Restriction Tables >> Default SYSTEM Transfer >> Look at the entry: * >> Uncheck (unblock)the blocked check-box of this entry. If you do not unblock this entry, when you transfer the call, the system will response "You cannot be transferred to this number. Check the number and try again"

With Unity Connection 6. There is not this feature. So if you want to allow opening greeting call handler to transfer the call to extension which is not unity subscriber. You must individually create the System Call Handler for each extension.
For example: create the system call handler 4000. Configure Transfer option to transfer call to extension 4000 (which is not Unity subscriber).

Help me !! about AA transfer in unity connection

Abdulmoin Sabouni — Thu, 07 Nov 2013 14:40:32 GMT

Thank you very very much for your last update, I was looking for this solution since long time.

Thanks again for all..

This System Setting helped me

Ajeya Shetty — Mon, 21 Apr 2014 19:31:58 GMT

This System Setting helped me to fix the issue. Can anyone please explain me this behavior ?

Why * has to be unchecked ?

Thanks gssnettech

ev1205 — Wed, 25 Nov 2015 23:02:58 GMT

Thanks gssnettech

Five years later you saved my day !!!

System Settings >> Restriction Tables >> Default SYSTEM Transfer >> Look at the entry: * >> Uncheck (unblock)the blocked check-box of this entry.

Best Regards

Please be aware that by

tzunt — Wed, 02 Dec 2015 18:43:35 GMT

Please be aware that by unblocking previously blocked (and tested) patterns, you may open the system up for toll fraud. Don't ask how I know this.

It would be better in my opinion to add an unblocked pattern for ???? to allow transfers to four digit extensions, for example than to unblock * (all unknown patterns). Some useful blocked patterns may exist before the "* pattern" which may prevent PSTN access beginning with a 9. However, there may be other patterns which can provide toll access & do not begin with a nine.

Ensuring the CSS for Unity Connection is restricted from PSTN toll access may also be wise, if possible.

When enabling "Allow Transfers to Numbers Not Associated with Users or Call Handlers," I would recommend an unblocked pattern like 21??? in the restriction table to reach 21XXX extensions rather than unblocking *. Just my $0.02 Thanks

Tzunt,

ev1205 — Wed, 02 Dec 2015 19:49:02 GMT

Tzunt,

I applied your recommendation and It worked !!

Thanks again for your support !!!

Enrique Villasana

Hi,

haider.rizwan — Fri, 26 Feb 2016 19:23:41 GMT

Hi,

please help me. I have CUCM and CUC version10.5.2.

when someone calls from PSTN and dial by extension, CUC doesn't transfer the call however if we test call transfer by dialing AA internally it works.

I have tried adding ??? pattern in restriction table as well but it doesn't work.

Kindly help me to fix the issue as i am totally confused what to do.

thank you so much. Please help it's very important.

Are you accessing the same

tzunt — Tue, 01 Mar 2016 15:53:51 GMT

Are you accessing the same call handler when "we test call transfer by dialing AA internally it works" as when you call from the PSTN and it doesn't work?

Logs or Port Status in RTMT may help you confirm you are accessing the same call handler.

I'd assume if you reach the same working call handler that works internally from the PSTN, the PSTN call should also work unless you have a DTMF relay issue or something.

Thx TZ

Hi gssnettech,

Bryan Wulfric — Wed, 22 Jun 2016 16:47:17 GMT

Hi gssnettech,

I'm using Unity Conn version 10.x. I've followed your 2 steps : check "Allow Transfers to Numbers Not Associated with Users or Call Handlers" and uncheck entry * in Default System Transfer.

But Unity Conn still cannot transfer call to user who is not Unity subscriber. Unity Conn play "You must individually create the System Call Handler for each extension"

CSS of voicemail port have access to partition of the user who is not Unity subscriber.

Do you have any idea?

Thanks.

Hi gnssettech,

phroquero1 — Tue, 18 Oct 2016 07:48:30 GMT

Hi gnssettech,

I have a same issue above with Bryan and I'm using CUCM & CUC ver 11.x instead. Checking the "Allow Transfers to Numbers Not Associated with Users or Call Handlers" and uncheck entry * in Default System Transfer." can't help.

I'm getting this message "You cannot be transferred to this number. Check the number and try again" when trying to transfer to other DN that is not associated in CUC Users.

Do you have other solution on this?

Thank you in advance.

i am using 10.x and ran into

dshumake — Sun, 27 Nov 2016 17:59:02 GMT

i am using 10.x and ran into the same issue.

it ended up being the CSS...

needed to add the PT of the number to VM CSS

Re: Help me !! about AA transfer in unity connection

gsanchez@intesis.com.pe — Fri, 10 Nov 2017 00:33:49 GMT

It works.. it seems theres is a default restriction table that not allow to tranfers DN so there are 2 ways.. to unchek * restriction or to add the first digit of your DN's extensions.

Regards,

Re: Help me !! about AA transfer in unity connection

Joel Jackson — Wed, 11 Jul 2018 14:20:15 GMT

8 years later and you have saved me some headache my friend!! I had this exact same issue.

Re: Please be aware that by

Joel Jackson — Wed, 11 Jul 2018 14:21:09 GMT

Nice bit of info. ????? works perfectly. Thanks!

Re: Help me !! about AA transfer in unity connection

Duong Tran — Wed, 22 Jul 2020 08:00:24 GMT

Hi Mister,

I also try with System Setting-> Roles->Restriction Pattern ->Default System Setting( my CUC firmware version11.5.1.12900-21)
I try to add pattern of my company extension, uncheck the block box. The issue fixed but happens again sometimes. Not sure what cause this nasty thing and why it happens randomly sometimes.
Regards,