topic Re: CME V7.1 Working but no GUI in Unified Communications Infrastructure

CME V7.1 Working but no GUI

jim.lucking — Tue, 26 Mar 2019 04:31:09 GMT

Runing CME V7.1 under IOS 12.4(22)YB2 on a Cisco 3845 Router. Everything working fine apart from have no GUI.

Have done a complete fresh install of full CME tar file.

Have enabled http and told config where to get GUI files from flash.

GUI Window opens with title bar but script errors stop whole screen displaying.

Anyone seen this before?

Re: CME V7.1 Working but no GUI

bascheew — Mon, 10 Aug 2009 19:20:25 GMT

Unfortunately I see it all the time with the CME "Full" package. In this package all the GUI files are in the flash:/GUI folder, and I've never been able to get it to work properly with the files in that folder. I've fixed it everytime by moving all the GUI files to flash:/

If anyone knows how to make it work I would also be appreciative!

Re: CME V7.1 Working but no GUI

jim.lucking — Tue, 11 Aug 2009 06:47:14 GMT

Thanks.

Will give that a go - moving all files to the root of flash

Normally you should just have to use the line:ip http path flash:/gui which points to the subdirectory but this doesn't seem to work