topic MWI not working for SIP phones in Unified Communications Infrastructure

MWI not working for SIP phones

Vishal Parekh — Tue, 19 Mar 2019 19:39:44 GMT

Hi All,

I have 8811 SIP phones for which I have configured voicemail features. SIP phones MWI light is not working even though my extensions are getting messages.

Any specific configuration require for SIP phones.

voice register global
mode cme
source-address 10.105.61.2 port 5060
timeouts interdigit 6
max-dn 100
max-pool 100
authenticate register
authenticate realm al
timezone 35
time-format 24
date-format D/M/Y
voicemail 299
url authentication http://10.105.61.2/CCMCIP/authenticate.asp
tftp-path flash:
file text
create profile sync 0000083452577206
ntp-server 10.114.80.17 mode directedbroadcast
camera
video
!!
voice register dn 5
number 234
call-forward b2bua busy 299
call-forward b2bua mailbox 299
call-forward b2bua noan 299 timeout 15
allow watch
pickup-call any-group
pickup-group 234
name User234
label 234
mwi

CME MWI configuration

!
ephone-dn 399
number 801...
mwi on
!
!
ephone-dn 400
number 802...
mwi off
!
!

sh ccn subsystem sip
SIP Gateway: 10.105.61.2
SIP Port Number: 5060
DTMF Relay: sip-notify,sub-notify
MWI Notification: outcall,sub-notify
MWI Envelope Info: disabled
Transfer Mode: bye-also
SIP RFC Compliance: Pre-RFC3261

Above configuration is working for my SCCP phones. Please advice for the SIP phone MWI notification.

Do you have:

Brandon Buffin — Tue, 25 Jul 2017 17:28:53 GMT

Do you have:

sip-ua
mwi-server ipv4:x.x.x.x unsolicited

Brandon

Yes, I do have this command

Vishal Parekh — Wed, 26 Jul 2017 11:08:18 GMT

Yes, I do have this command under my CME;

sip-ua

mwi server ipv4:10.105.61.2 unsolicited

I have followed few documents and configured unsolicited configuration on both side - CME & CUE but did not worked out for me.

what are the traces level and how I should collect to check the errors ?

Regards,

Vishal

See the following link for

Brandon Buffin — Wed, 26 Jul 2017 11:55:32 GMT

See the following link for the CUE traces and CME debugs to turn on.

http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unity-express/60081-unity-mwi-problems.html