topic Re: 4402 with latest 5.148 crashes on debug client command in Wireless

4402 with latest 5.148 crashes on debug client command

armonk_netdesk — Sat, 03 Jul 2021 22:39:43 GMT

I can reproduce system crash/reset at will when I turn on the debug client command.

Sun Apr 6 04:03:10 2008: 00:16:41:a8:58:9f 0.0.0.0 DHCP_REQD (7) Deleted mobile LWAPP rule on AP [00:00:00:00:00:00]

Sun Apr 6 04:03:10 2008: 00:16:41:a8:58:9f Deleting mobile on AP 00:00:00:00:00:00(0)

Sun Apr 6 04:03:10 2008: 00:16:41:a8:58:9f 0.0.0.0 Removed NPU entry.

Sun Apr 6 04:03:10 2008: 00:16:41:a8:58:9f Adding mobile on Wired Guest 00:00:00:00:00:00(0)

Sun Apr 6 04:03:15 2008: 00:16:41:a8:58:9f apfMsExpireCallback (apf_ms.c:433) Expiring Mobile!

Read from remote host usce02wc.net: Connection reset by peer

Re: 4402 with latest 5.148 crashes on debug client command

drolemc — Thu, 10 Apr 2008 20:53:30 GMT

These outputs do not give an idea on the root cause of the WLC crash. Are these the only outputs present in the crash log? Can you post the complete crash log information from the WLC? That will give some insight to identify the issue.

Re: 4402 with latest 5.148 crashes on debug client command

Scott Fella — Thu, 10 Apr 2008 23:54:06 GMT

If you can reproduce this, then you should open a TAC case and have them look into this.... unless they already know about this:)

Re: 4402 with latest 5.148 crashes on debug client command

armonk_netdesk — Sun, 13 Apr 2008 03:16:24 GMT

TAC wont let me open a case becasue my smartnet expired a few weeks ago. That's why I am here!

Re: 4402 with latest 5.148 crashes on debug client command

armonk_netdesk — Mon, 14 Apr 2008 17:24:46 GMT

Yes thanks here is the crash log.....

Re: 4402 with latest 5.148 crashes on debug client command

Scott Fella — Mon, 14 Apr 2008 17:35:15 GMT

I understand. Well there are issues with the 5 code and NPU errors and reboots with the WiSM's. Never heard if there are issues with the 4402 or 4404's, but no fix as of yet as what I know.

Re: 4402 with latest 5.148 crashes on debug client command

armonk_netdesk — Mon, 14 Apr 2008 19:59:03 GMT

OK, thanks ... just wanted to warn others about this. It's really frustrating as this is one of the more useful debug commands.

Re: 4402 with latest 5.148 crashes on debug client command

Scott Fella — Mon, 14 Apr 2008 23:14:14 GMT

The most reliable code I think is 4.1.185. $.2 has issues but will be trying the 4.2.112 since 4.2 is required by the 1252 ap's. Haven't heard any good experiences yet with 5, but there must be others that haven't had issues with 5.

Re: 4402 with latest 5.148 crashes on debug client command

moises.rodriguez — Wed, 18 Jun 2008 16:34:23 GMT

Well, I have the same version 5.0.148 and recently my 4404WLC crashed, it rebooted automatically.

Any ideas?

Re: 4402 with latest 5.148 crashes on debug client command

Scott Fella — Wed, 18 Jun 2008 21:33:37 GMT

5.0 has soo many issues in my mind. Youare better off to down grade to 4.2.

Re: 4402 with latest 5.148 crashes on debug client command

armonk_netdesk — Wed, 25 Jun 2008 20:30:45 GMT

I agree. If you require stability on your WLAN DO NOT USE 5.148 code. I am only running it in the lab for now. After a couple of days the 4402 with 5.148 starts sending SNMP traps with "TRACEBACK" errors. The only way to get this to stop is to reboot the WLC.

Re: 4402 with latest 5.148 crashes on debug client command

Robert Rowland III — Thu, 26 Jun 2008 17:38:51 GMT

There should be a 5.1 version out .... rsn.

I _am_ running 5.0.148 on 6 wisms and since downgrading is a drag ....

Re: 4402 with latest 5.148 crashes on debug client command

Scott Fella — Thu, 26 Jun 2008 19:39:27 GMT

Even when the 5.1 comes available, I wouldn't be the first to test it. Now that they are combining the mesh train into it, i would think it would be worse..... well at least the first couple versions.

Re: 4402 with latest 5.148 crashes on debug client command

armonk_netdesk — Tue, 01 Jul 2008 13:46:10 GMT

Anyone see this on the 5.148 code ? It starts after 2 days and you have to reboot to clear it.

Jul 1 13:21:09 armonk usce02wc e3-net-00001 - ERROR (local0.alert - Traceback: 100e9828 100ea138 10100410 1038c32c 10c060e4 10d744f8) 11

Jul 1 13:21:08 armonk usce02wc e3-net-00001 - ERROR (local0.alert - Traceback: 100e9828 100ea138 10100410 1038c32c 10c060e4 10d744f8) 11

Re: 4402 with latest 5.148 crashes on debug client command

ckelly — Tue, 01 Jul 2008 14:52:13 GMT

Didn't look for it, but on a recent TAC case about crap that wasn't working in 5.148 I was instructed to go back to 4.2.130. Which is better, but still goofy.