topic Re: Tx and Rx Diversity antenna in Wireless

Tx and Rx Diversity antenna

robertocrico — Sat, 03 Jul 2021 22:58:57 GMT

Hi, I have received some new ap1231 with c1200-k9w7-mx.123-8jec IOS. I can't set anymore tx and rx antenna to Right(Primary) value. Do you know why?

Please take note that with the previous IOS was possible to do this.

Thanks a lot

Re: Tx and Rx Diversity antenna

Rob Huffman — Wed, 04 Jun 2008 17:23:15 GMT

Hi Roberto,

You are hitting this Bug;

These caveats are resolved in Cisco IOS Release 12.3(8)JEC1:

CSCsl17857

1231 access point running Cisco IOS Release 12.3(8)JEC is unable to set transmit/receive antenna options.

http://www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/12_3_8_JEC1rn.html#wp188929

Hope this helps!

Rob

Re: Tx and Rx Diversity antenna

lonnylegrand99 — Mon, 30 Jun 2008 13:02:58 GMT

Rob, does this include the problem with configuring an external antenna.

With previous 1232 AP's I've not had any problems configuring a 9dBi Hawking antenna on this ap. Now when I enter the information and hit save, it takes me to a 404 page. I've attached a couple of pdf's and a txt file showing the results.

I hope this fix addresses my issue as well.

Thank,

Lonny LeGrand

Re: Tx and Rx Diversity antenna

Rob Huffman — Tue, 01 Jul 2008 13:17:52 GMT

Hi Lonny,

I don't think this bug is related to your issue as it is specific to the 1231. What exact IOS are you running so we can check this out.

Rob

Re: Tx and Rx Diversity antenna

lonnylegrand99 — Thu, 10 Jul 2008 18:30:48 GMT

FYI, I'm updating this to inform all that the software upgrade resolved my issue with configuring an external antenna as well as the TX and RX issue.