topic Antenna alignment in Wireless

Antenna alignment

mikespenard — Sun, 04 Jul 2021 17:12:17 GMT

My hardware...

Cisco 1300 12.3

Cisco Command Referance states......

#dot dot11 antenna-alignment

Use the dot11 antenna-alignment privileged EXEC command to activate the antenna-alignment tool for an radio interface. Use this tool to test and align the access point antenna with another remote antenna.

dot11 interface-number antenna-alignment [timeout]

Examples

This example shows how to start the antenna-alignment test for radio interface 0:

AP# dot11 dot11radio 0 antenna-alignment

Issue:

AP1#dot dot11 0 ?

carrier Carrier detect test

linktest test the radio link

update-group-key Update Group Key

AP1#dot11 dot11Radio 0 antenna-alignment

% Invalid input detected at '^' marker.

Why is the command not supported on my accesspoint?

Do i have to be in install mode?

Re: Antenna alignment

dixho — Fri, 26 Nov 2004 23:46:43 GMT

You need to set the 1310 either at non-root bridge or workgroup bridge.

In my other posting, I explain why access point mode does not support the command.

Re: Antenna alignment

jhoffmann015 — Thu, 19 Apr 2012 03:55:34 GMT

I have my nonroot bridge in - wait for it - non root bridge mode, and when I run antenna-alignment I get the following:

NonRoot#dot11 dot11Radio 0 antenna-alignment

% Invalid input detected at '^' marker.

Can you shed any light on why I cant run the command? I am using Cisco 1200 G APs for root and nonroot. See below screenclips:

Message was edited by: Jonathan Hoffmann for clarification

Antenna alignment

Leo Laohoo — Thu, 19 Apr 2012 04:05:51 GMT

What's your WAP model again?

Antenna alignment

jhoffmann015 — Thu, 19 Apr 2012 04:08:27 GMT

its a pair of

cisco AIR-AP1231G-A-K9

both running

Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(8)JED1, RELEASE SOFTWARE (fc3)

Antenna alignment

Leo Laohoo — Thu, 19 Apr 2012 04:46:17 GMT

I believe you need to have 1310.

Antenna alignment

jhoffmann015 — Thu, 19 Apr 2012 12:28:50 GMT

the command is listed in the 1200 command reference - and when I run sh antenna-alignment, it says it hasnt been run yet.

http://www.cisco.com/en/US/docs/wireless/access_point/12.2_8_JA/command/reference/bcrmain.html#wp2439534

Good morning to all. I see

flielguera — Sat, 05 Mar 2016 13:58:30 GMT

Good morning to all. I see that this POST is 04 years old, but I want to update it. I have a median installed base of Cisco Aironet 1310 due to connectivity problems between the AP and NON-ROOT ROOT, I wanted to use the "antenna-aligment" command but it shows me the error showing.

BR-TFASE5BK-5#dot11 dot11Radio0 antenna alignment
^
% Invalid input detected at '^' marker.

BR-TFASE5BK-5#

The version of IOS:

BR-TFASE5BK-5#sh ver
Cisco IOS Software, C1310 Software (C1310-K9W7-M), Version 12.4(25d)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 11-Aug-11 03:35 by prod_rel_team

ROM: Bootstrap program is C1310 boot loader
BOOTLDR: C1310 Boot Loader (C1310-BOOT-M) Version 12.3(2)JA4, RELEASE SOFTWARE (fc1)

BR-TFASE5BK-5 uptime is 6 days, 22 hours, 44 minutes
System returned to ROM by power-on
System image file is "flash:/c1310-k9w7-mx.124-25d.JA1/c1310-k9w7-mx.124-25d.JA1"

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-BR1310G-A-K9-R (PowerPCElvis) processor (revision A0) with 25590K/7168K bytes of memory.
Processor board ID FTX1145U09A
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
1 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:1D:A2:E4:91:FE
Part Number : 73-8960-09
PCA Assembly Number : 800-24963-06
PCA Revision Number : A0
PCB Serial Number : FOC1139409V
Top Assembly Part Number : 800-28763-01
Top Assembly Serial Number : FTX1145U09A
Top Revision Number : A0
Product/Model Number : AIR-BR1310G-A-K9-R

Configuration register is 0xF

BR-TFASE5BK-5#

Interface:

!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption mode ciphers tkip
!
encryption vlan 15 mode ciphers tkip
!
ssid LNK-TRU-DIS
!
antenna gain 12
parent 1 001d.a2ef.3a70
parent timeout 30
station-role non-root
mobile station scan 2462
!

Please any ideas about what append.

Regards.

Fernando.