topic Re: 1400 antenna azimuth plot in Wireless

1400 antenna azimuth plot

jwarner — Sun, 04 Jul 2021 16:42:38 GMT

The AIR-BR1410A-A-K9 has a built in 22.5 dB antenna. While I can find azimuth plots for all the external antennas sold as separate products for the bridge with an N connector, I can't find anything for the built-in patch array on the integrated model. I expect to be asked by the forces for voluntary frequency coordination what lobes hang off the antenna center line. Does anyone know where I can find the azimuth plot for the built-in antenna?

Re: 1400 antenna azimuth plot

ebreniz — Thu, 17 Jun 2004 19:49:28 GMT

Try whether this can help you.

http://www.cisco.com/en/US/products/hw/wireless/ps469/products_data_sheet09186a008008883b.html

http://www.cisco.com/en/US/products/hw/wireless/ps5279/products_data_sheet09186a008018495c.html

Re: 1400 antenna azimuth plot

jwarner — Thu, 17 Jun 2004 21:59:23 GMT

The first data sheet has a polar plot of antenna sensitivity for every antenna EXCEPT the 22.5 dB built-in. I've been asked whether there are side lobes to the radiation pattern. I don't know how to answer that without a polar plot.

The data sheet for the radios contains no polar or azimuthal radiation information at all.

Thanks

Re: 1400 antenna azimuth plot

gillins — Tue, 22 Jun 2004 16:50:02 GMT

I had the same question and had to open a tac case to get the information. I am attaching the the information that you need.

hope this helps

scott