topic Do we need to change versions in Wireless

Compatible versions for Cisco CMX 10.3

sajidabbas — Mon, 05 Jul 2021 14:33:59 GMT

Hi,

We are planning to upgrade our CMX virtual from 10.2 to 10.3 due to some issue.

Can anyone assist us in confirming what version WLC and Prime Infrastructure are compatible with it.

Our WLC is 5508 currently running 8.3.102 and Prime version is 3.1.

Do we need to change versions of WLC an Prime to operate with CMX version 10.3

Thanks

Sajid

Rasika Nayanajith — Fri, 18 Aug 2017 02:48:29 GMT

Do we need to change versions of WLC an Prime to operate with CMX version 10.3

NO, you should be good with what you got (PI3.1 and WLC 8.3.x)

Refer below link (table 6)

HTH

Rasika

*** Pls rate all useful responses ***

sajidabbas — Fri, 18 Aug 2017 03:03:18 GMT

Hi Rasika,

Thanks for your response and table.

Could you possible advise on a recommended version above 8.3 for WLC. Software section on cisco website shows latest stable version of 8.2.151.

Rasika Nayanajith — Fri, 18 Aug 2017 03:06:30 GMT

8.3.122.0 is the one you should go for if it has to be 8.3.x ( I would not go to 8.4.x or 8.5.x as they are not tested by customers at large)

Cisco recommended code release is 8.2.160.0 (even though star mark is for 8.2.151.0 on web page)

HTH

Rasika

*** Pls rate all useful responses ***