topic QOS Roles? in Wireless

QOS Roles?

rmcconnell — Sun, 04 Jul 2021 07:32:07 GMT

I'm looking to implement QOS roles for my guest traffic. I have a guest WLan with web auth, but the QOS role option does not appear under the wireless menu. Wireless > QOS > Qos Roles. So far I have tried it on 2504, 4402, and on a Virtual WLC and none have the option. I suspect this feature may be 5508 (or 7500) only. Can anyone confirm this?

thanks

Rob

QOS Roles?

Rasika Nayanajith — Sun, 28 Jul 2013 10:07:11 GMT

No, this feature is there in 44xx,25xx & many other controllers. Below config guide says only 2106 it is not supported

http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70ccfg.html#wpxref96780

If you follow the steps, you should find it.

HTH

Rasika

QOS Roles?

rmcconnell — Sun, 28 Jul 2013 11:32:27 GMT

Yep

Been through the admin guide. The option is not avaiable from gui nor the CLI on either the 2106, 2504, 4402 (running 7.0.116) nor on the CLI of the Virtual WLC running version 7.4.

I have built Web based authentication WLAN, and local guest user just in case they are require to make the option visible.

The options are not there on the CLI nor on the Wireless QOS option.

License? 5508?

need help

Rob

QOS Roles?

Rasika Nayanajith — Sun, 28 Jul 2013 19:24:24 GMT

Here is my 4402 (7.0.116.0) CLI, It is there.... Check it again.

(4402-3) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.

Product Name..................................... Cisco Controller

Product Version.................................. 7.0.116.0

RTOS Version..................................... 7.0.116.0

Bootloader Version............................... 7.0.116.0

Emergency Image Version.......................... 7.0.116.0

Build Type....................................... DATA + WPS

(4402-3) >show inventory

Burned-in MAC Address............................ 00:0B:85:43:D8:60

Crypto Accelerator 1............................. Absent

Crypto Accelerator 2............................. Absent

Power Supply 1................................... Absent

Power Supply 2................................... Present, OK

Maximum number of APs supported.................. 25

NAME: "Chassis" , DESCR: "Cisco Wireless Controller"

PID: AIR-WLC4402-25-K9, VID: V01, SN: FLS1002H04M

(4402-3) >config netuser ?

add Creates a local network user.

delete Delete an existing network user.

description Sets the description for a network user.

guest-lan-id Configures a Wired guest LAN Id for a network user.

guest-role Configures a Role for Guest User.

lifetime Configures the lifetime for a Guest Network User. Valid range is 60 to 259200 seconds.

maxUserLogin Configures the maximum number of login sessions allowed for a network user

password Configures a password for a network user.

wlan-id Configures a Wireless LAN Id for a network user

(4402-3) >config netuser guest-role ?

apply Applies a Role to a Guest User.

create Creates a new Guest Role.

delete Deletes a Guest Role.

qos Configures QoS parameters for a Guest Role.

QOS Roles?

Ravi Singh — Mon, 29 Jul 2013 01:31:16 GMT

Please check this document. It will help you

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807e9717.shtml