topic Re: Bridge 1300 building to building link for VOIP Data Rates se in Wireless https://community.cisco.com/t5/wireless/bridge-1300-building-to-building-link-for-voip-data-rates/m-p/1345536#M102560 <HTML><HEAD></HEAD><BODY><P>OFDM is a physical layer encoding technology for transmitting signals through the RF. This method breaks one high-speed data carrier into several lower-speed carriers that transmit in parallel across the particular RF spectrum. OFDM, when used with various modulation types such as 802.11g and 802.11a, is capable of supporting data rates as high as 54 Mbps. </P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/5_0_1/english/administration/guide/7921wrnt.html#wp1085347" target="_blank">http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/5_0_1/english/administration/guide/7921wrnt.html#wp1085347</A></P></BODY></HTML> Thu, 27 Aug 2009 20:46:44 GMT pradeepde 2009-08-27T20:46:44Z Bridge 1300 building to building link for VOIP Data Rates settings and QoS https://community.cisco.com/t5/wireless/bridge-1300-building-to-building-link-for-voip-data-rates/m-p/1345535#M102559 <P>Hi,</P><P>What are the recomendations for data rates settings of wlan fo using voip in a link building to building.</P><P>Default is</P><P> speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0</P><P> 54.0</P><P>Should i maintain or change to what?</P><P></P><P>Also what QoS should i apply?</P><P>Thks</P><P>Best Regards</P><P>Marco</P> Sun, 04 Jul 2021 00:58:03 GMT https://community.cisco.com/t5/wireless/bridge-1300-building-to-building-link-for-voip-data-rates/m-p/1345535#M102559 etmarcof 2021-07-04T00:58:03Z Re: Bridge 1300 building to building link for VOIP Data Rates se https://community.cisco.com/t5/wireless/bridge-1300-building-to-building-link-for-voip-data-rates/m-p/1345536#M102560 <HTML><HEAD></HEAD><BODY><P>OFDM is a physical layer encoding technology for transmitting signals through the RF. This method breaks one high-speed data carrier into several lower-speed carriers that transmit in parallel across the particular RF spectrum. OFDM, when used with various modulation types such as 802.11g and 802.11a, is capable of supporting data rates as high as 54 Mbps. </P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/5_0_1/english/administration/guide/7921wrnt.html#wp1085347" target="_blank">http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/5_0_1/english/administration/guide/7921wrnt.html#wp1085347</A></P></BODY></HTML> Thu, 27 Aug 2009 20:46:44 GMT https://community.cisco.com/t5/wireless/bridge-1300-building-to-building-link-for-voip-data-rates/m-p/1345536#M102560 pradeepde 2009-08-27T20:46:44Z