topic Roaming issue and power level problem in Wireless

Roaming issue and power level problem

Dominic Stalder (old profile) — Sun, 04 Jul 2021 01:40:25 GMT

Hi there

we have a WLC with about 25 LAPs and use WPA2 with PEAP and fast secure roaming (CCKM).

First of all there is the problem, that most of the access points are on power level 7, even if there are only 3 access points in a place with 3 different channels. What problem could there be?

This problem leads to a roaming issue, so there are timeouts while the client is roaming between the different access points. On the other hand, we have problems when the client roams with the reauthentication. In my opinion the client should not run through a full authentication (PEAP) when CCKM is enabled, but the client always authenticate against the ACS and does a full authentication. How can we resolve this problem?

Thanks in advance and best regards

Dominic

Re: Roaming issue and power level problem

George Stefanick — Sun, 28 Mar 2010 21:10:45 GMT

Are you using RRM is it enabled ? If it is what are the settings? Are your APs static power?

Re: Roaming issue and power level problem

Dominic Stalder (old profile) — Mon, 29 Mar 2010 14:02:31 GMT

Yes RRM is enabled with the standard values:

Power Level Assignment Method: Automatic every 600 secs

Power Threshold -70 dBM

Power Neighbor Count 3

No, the power settings are calculated with TPC.