topic Need Help mesh in Wireless

Need Help mesh

Kamran Mustafayev — Sun, 04 Jul 2021 05:20:27 GMT

I have a few questions

1) how to config mesh network on standalone cisco ap using 5 ghz, just give me configs please

2) 802.11n feauter enabling command

thank you

Surendra BG — Mon, 25 Jun 2012 07:09:42 GMT

1>> Mesh network cannot be built using AUtonomous APs.. MESH is a different design..

The below link may help you

2>> 802.11N runs on top og G and A and it alone cant drive..

Please mkae sure you are using below configs

WPA 2 Personal or WPA2 Enterprise with AES as the Encryption + WMM Enabled + All MCS rates enabled.

Regards

Surendra

Surendra BG — Mon, 25 Jun 2012 07:10:54 GMT

2>> 802.11N runs on top og G and A and it alone cant drive..

Please mkae sure you are using below configs

WPA 2 Personal or WPA2 Enterprise with AES as the Encryption + WMM Enabled + All MCS rates enabled.

Open auth + no encryption + WMM Enabled + All MCS rates enabled.

Regards

Surendra

Amjad Abdullah — Mon, 25 Jun 2012 07:14:37 GMT

although mesh is not available with autonomous, you can use WGB if you want to bridge the communication with the wired side.