topic Hello. in Wireless

Change from [Autonomous Mode] to [Lightweight Mode]

akirat001 — Mon, 05 Jul 2021 12:14:21 GMT

I used Aironet1700 [AIR-CAP1702I-Q-K9].

I changed [Autonomous Mode] by <capwap ap autonomous> command.

But I want to return [Lightweight Mode].

Please tell me how can I do.

Sandeep Choudhary — Thu, 16 Jun 2016 09:03:54 GMT

Hi,

Paste the output of this command:

sh version from AP.

Please check these posts to convert AAP to LAP.

https://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/

https://www.youtube.com/watch?v=wWDrFjwVNb0

https://www.youtube.com/watch?v=Fiv76UpStKI

Regards

Dont forget to rate helpful posts

akirat001 — Mon, 20 Jun 2016 05:44:00 GMT

Hello.

Thank you for your advice.

I found this url and tried them.
As a result, we were able to change.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-guide/b_cg80/b_cg80_chapter_01101010.html

Regards

Sandeep Choudhary — Mon, 20 Jun 2016 06:12:55 GMT

Hi,

Did my post solved your problem then please mark this question as answered. It may help others.

Regards

Dont forget to rate helpful posts

mohanak — Tue, 21 Jun 2016 01:04:14 GMT