topic Re: how to set the range of the Cisco AP in Wireless

how to set the range of the Cisco AP

NamelRahman7603 — Mon, 05 Jul 2021 17:44:14 GMT

how to set the Cisco signal so that it is more far-reaching (using cisco aeronet 1600 series)

Mark Elsen — Mon, 22 Jul 2019 16:27:03 GMT

- Which will accomplish nothing for you, if clients can't respond (anymore), within that range; time to study some wireless fundamentals....

HaifengLi — Sun, 04 Aug 2019 08:56:42 GMT

You can try changing the TX power level.

pieterh — Tue, 13 Aug 2019 13:06:35 GMT

what are you trying to achieve?

if you need a point-to-point radio link, there are some options with directional antenna.

but for clients on a floor it most likely comes down to adding access-points for coverage.

in addition to this

you may change the power level, but there is a legal maximum transmit level.

You can concentrate radio signal in certain direction with special antennae, but this also has restrictions to the max transmit level.

for higher levels it may not fall under the wi-fi regulations, you may need to request a license,