topic Re: WLC 2504 CONTROLLER WITH 1700 AP,CLIENT NOT GETING AUTOMATICALLY CONNECT TO NEARBY AP in Wireless

WLC 2504 CONTROLLER WITH 1700 AP,CLIENT NOT GETING AUTOMATICALLY CONNECT TO NEARBY AP

amalmichaelvj — Mon, 05 Jul 2021 15:16:46 GMT

HelloTeam,

i have Cisco 2504 lan controller with 5 Aironet 1702i ap..

The problem am facing is that,once i connect a client laptop to any one ap,when i move the laptop from it's range and reach the neighbour ap .it is not automatically shifting to neighour ap..

how can sort out this mobility issue..

all ap's are lightweight joined in wlc 2504 controller

Re: WLC 2504 CONTROLLER WITH 1700 AP,CLIENT NOT GETING AUTOMATICALLY CONNECT TO NEARBY AP

Flavio Miranda — Tue, 20 Feb 2018 16:16:32 GMT

Roam is a client decision. This historical problem could be solved already if every client vendor and infrastructure vendor made us a favor and followed IEEE standard.

Take a look in Fast transition (802.11r).

This is supported on Cisco WLC, you may need enable it.

Make sure your client support it as well.

-If I helped you somehow, please, rate it as useful.-