WLC Debugging not generating anything

pwilliams86 — Mon, 05 Jul 2021 14:49:37 GMT

Hi,

We have a AIR-CT5760 (Sw version 03.06.02E, SW image ct5760-ipservicesk9) WLC that is not generating any output when I enter debug client mac-address xx:xx:xx:xx:xx:xx. It isnt throwing up any syntax errors or anything, it just does nothing. The devices I want to debug are connected to the wireless network so I cant believe that there isnt any output to display.

I have tried every combination of how the mac address can be written with no luck. There doesnt seem to be a huge amount of literature on this type of WLC (compared to others) so any help is appreciated.

Re: WLC Debugging not generating anything

Flavio Miranda — Wed, 08 Nov 2017 10:19:34 GMT

Hi @pwilliams86

Try the command terminal monitor.

-If I helped you somehow, please, rate it as useful.-

Re: WLC Debugging not generating anything

pwilliams86 — Wed, 08 Nov 2017 11:22:47 GMT

Thank you, that has worked.

topic Re: WLC Debugging not generating anything in Wireless

WLC Debugging not generating anything

Re: WLC Debugging not generating anything

Re: WLC Debugging not generating anything