topic As you already stated EAP-TLS in Wireless

FlexConnect Standalone EAP-TLS Local Authentication

Alex Pham — Mon, 05 Jul 2021 10:30:55 GMT

Hi,

I understand that there is a limitation of 100 static users with FlexConnect Standalone Local Authentication and these users have to be pre-configured in WLC with username and password. However, EAP-TLS will not use username/password for authentication, it uses certificate instead.

May I know if username/password is still required during FlexConnect Standalone EAP-TLS Local Authentication?

Thank you.

Regards,

Alex

As you already stated EAP-TLS

Rasika Nayanajith — Mon, 06 Jul 2015 23:45:58 GMT

As you already stated EAP-TLS is certificate based.

In FlexConnect standalone mode, your AP act as RADIUS server

HTH

Rasika

*** Pls rate all useful responses ***

Hi Rasika,Do i still need to

Alex Pham — Tue, 07 Jul 2015 03:16:53 GMT

Hi Rasika,

Do i still need to provide local users with username/password in WLC?

For EAP-TLS, the limitation of 100 users authentication still applies, is it correct?

Thanks.

Alex