topic Re: Model number of the power adapter for Cisco access point CAP3502I-A-K9 , in Wireless

Model number of the power adapter for Cisco access point CAP3502I-A-K9 ,

Ibrahim Jamil — Mon, 05 Jul 2021 14:55:05 GMT

Hello International friends

what is the model number of the power adapter for Cisco access point CAP3502I-A-K9 ,

I m surprised that power adapter of Cisco ip phone ( CP-PWR-CUBE-3) able to power this Access point

your input is very much appreciated

thanks a lot

Ibrahim jamil

Re: Model number of the power adapter for Cisco access point CAP3502I-A-K9 ,

Sandeep Choudhary — Mon, 27 Nov 2017 10:50:17 GMT

As per datasheet: https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1250-series/data_sheet_c78-594630.html

Local power supply is:

Cisco AP3500 Local Power Supply (AIR-PWR-B=)

Regards

Dont forget to arte helpful posts

Re: Model number of the power adapter for Cisco access point CAP3502I-A-K9 ,

Flavio Miranda — Mon, 27 Nov 2017 10:56:22 GMT

This is the Cisco AIR-PWRINJ5. As long as a power adapter fill the requirements it will work.

https://www.cisco.com/c/en/us/td/docs/wireless/power/quick/guide/pwrinj5.html

-If I helped you somehow, please, rate it as useful.-

Re: Model number of the power adapter for Cisco access point CAP3502I-A-K9 ,

Ibrahim Jamil — Mon, 27 Nov 2017 11:21:58 GMT

Hello flavio

this link y provide is a power injector for non-PoE switch

thanks

Re: Model number of the power adapter for Cisco access point CAP3502I-A-K9 ,

Ibrahim Jamil — Mon, 27 Nov 2017 11:24:53 GMT

guys

why and how the power adapter of cisco IP Phone power this AP 3500??

THANKS

Re: Model number of the power adapter for Cisco access point CAP3502I-A-K9 ,

Sandeep Choudhary — Mon, 27 Nov 2017 11:47:38 GMT

Hi,

CP-PWR-CUBE-3= power supply for Cisco IP phones.

- Input voltage: 100V - 240V AC
- Max. input power: 5A

Input Power Requirements for 3502 AP:
• AP3500: 44 to 57 VDC
• Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz

as you can see in above power requirement ...whcih supports both thats the reason it working with AP as well.

It will work for 3502 AP but if cisco dont recommand it then dont use it.

Regards

Dont forget to rate helpful posts

Re: Model number of the power adapter for Cisco access point CAP3502I-A-K9 ,

Ibrahim Jamil — Mon, 27 Nov 2017 11:50:15 GMT

Hello sandeep

pls find attached power adapter specs

thanks

Re: Model number of the power adapter for Cisco access point CAP3502I-A-K9 ,

Sandeep Choudhary — Mon, 27 Nov 2017 12:01:45 GMT

yes i can see it.

Again it will work for 3502 but no one give you a 100% surety.

Best is to have the real power supply for 3502 AP as per cisco recommandation in data sheet.

Regards

Dont forget to rate helpful posts

Re: Model number of the power adapter for Cisco access point CAP3502I-A-K9 ,

Ibrahim Jamil — Mon, 27 Nov 2017 12:11:02 GMT

thanks for u time guys to clarify my concern by responding quickly to this thread