Problem setting Flexconnect Local Authentication

p-blalock — Mon, 05 Jul 2021 15:17:45 GMT

Not sure if this is a bug or not, but whenever I try to enable Flexconnect Local Auth at the SSID level, I get the following "The following errors occurred while updating the WLAN: Flexconnect Local Authentication is not supported with Local Switch Central DHCP." I do have local switching on the Flexconnect, but I do not have "Switch Central DHCP." I then created a Flexconnect Group and enabled "Enable AP Local Authentication"and No Central DHCP, then palced the APs into that Flexconnect Group, but still seeing "%DOT1X-3-INVALID_REPLAY_CTR" in the WLC syslog while clients roam.

I have two questions:

Why can't I enable Flexconnect Local Auth per SSID?

How can I determine that Flexconnect Local Auth is actually enabled and working?

WLC version is 8.3.122.0 (multiple controllers 8510s and AIR-CT2504-K9S - happens on all them)

3 SSIDs, two in Flexconnect mode

APs receiving DHCP from local switch

Flexconnect clients receiving DHCP from same local switch

Clients for tunnel SSID receiving DHCP from central server

Stumped. Anyone have a suggestion?

Best

Clients

Re: Problem setting Flexconnect Local Authentication

p-blalock — Thu, 22 Feb 2018 17:43:44 GMT

Update: I had to disable the SSID first, then had to disable FT for the SSID - didn't know that you can't do local auth and FT together.

topic Problem setting Flexconnect Local Authentication in Wireless

Problem setting Flexconnect Local Authentication

Re: Problem setting Flexconnect Local Authentication