topic Per SSID EAP-type Authentication in Wireless https://community.cisco.com/t5/wireless/per-ssid-eap-type-authentication/m-p/1898907#M10680 <HTML><HEAD></HEAD><BODY><P>You should configure a NAP (Network Access Policy). The selection factor should be "per SSID" and then for each policy you can allow different eap types.</P><P>for the "per SSID" part, the WLC has a command to change the called-station-id to append the SSID name to the ap mac address</P></BODY></HTML> Sat, 24 Mar 2012 10:52:41 GMT Nicolas Darchis 2012-03-24T10:52:41Z Per SSID EAP-type Authentication https://community.cisco.com/t5/wireless/per-ssid-eap-type-authentication/m-p/1898906#M10679 <P>Is there away to configure ACS 4.2 to only allow certain EAP-type of authentication per SSID? For example: SSIDA - only allows EAP-TLS and SSIDB - only allows EAP-PEAP on the same ACS server?</P><P></P><P>Any help is greatly appreciated.</P><P></P><P>Sent from Cisco Technical Support iPad App</P> Sun, 04 Jul 2021 04:47:43 GMT https://community.cisco.com/t5/wireless/per-ssid-eap-type-authentication/m-p/1898906#M10679 rsumpter 2021-07-04T04:47:43Z Per SSID EAP-type Authentication https://community.cisco.com/t5/wireless/per-ssid-eap-type-authentication/m-p/1898907#M10680 <HTML><HEAD></HEAD><BODY><P>You should configure a NAP (Network Access Policy). The selection factor should be "per SSID" and then for each policy you can allow different eap types.</P><P>for the "per SSID" part, the WLC has a command to change the called-station-id to append the SSID name to the ap mac address</P></BODY></HTML> Sat, 24 Mar 2012 10:52:41 GMT https://community.cisco.com/t5/wireless/per-ssid-eap-type-authentication/m-p/1898907#M10680 Nicolas Darchis 2012-03-24T10:52:41Z