topic Re: EAP-FAST on Linux in Wireless

EAP-FAST on Linux

nabil.netapp — Sun, 04 Jul 2021 02:45:10 GMT

Greetings all - We are in the process of piloting eap-fast for mainly WinXP using CSSC, how we also lime to accommodate our Mac and Linux users. We figured out the steps for Mac, however Linux seems a little an obscured topic with eap-fast. Any working recommendations for any flavors of Linux out there? I have been reading about Open1x and wa_supplicant, but wanted everyone's feedback on some ideas. Thank you, Nabil

Re: EAP-FAST on Linux

Surendra BG — Mon, 07 Feb 2011 08:34:06 GMT

Hi Nabil,

Here is the link which may give you some info on the linux machines with EAP-FAST..

http://hostap.epitest.fi/wpa_supplicant/

lemme know if this answered your question..

Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

Re: EAP-FAST on Linux

nabil.netapp — Mon, 07 Feb 2011 21:30:33 GMT

Hello Surendra -

Thank you for the link.

Are you aware of any documentation to us this suppilcant with Cisco EAP-FAST? It appears like a power client, but poorly documented .

Thank you,

Nabil

EAP-FAST on Linux

nicos-christofi — Wed, 25 Jan 2012 23:44:40 GMT

Surendra and Nabil:

I am also struggling with eap fast, in fact under the wpa_supplicant conf file, it fails with unknown protocol.

epa=FAST

I have the Atheros 5K chipset in the Cisco AIR PCI Cardbus, in Linux Monte Vista.

The examples given by Cisco on-line in the config of most of the eap protocols don't include any wpa_supplicant info on Linux

only MS Windows. What is the actual text configuration to enable eap FAST?

I have the Cisco ACS 4.1, and Cisco Wireless Controller, version 6.0.

Nick