topic Re: AP 1142N eap-fast in Wireless

AP 1142N eap-fast

csco11224163 — Sun, 04 Jul 2021 02:31:32 GMT

Recently I config a 1142 with local authentication,and I read the configuration doc of the 1142 , I config the ap with eap-fast but when I assosiat with the ap , the alert is pop-up-there is no trust certificat.so I download the PAC file ,but I don't know how to change the PAC file to a cer file.somebody can told me how to config the eap-fast with local authentication.

Re: AP 1142N eap-fast

Surendra BG — Thu, 09 Dec 2010 05:53:03 GMT

Hi,

here is the link to configure the LOCAL radius on the AP with EAP..

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c0912.shtml

we need to generate PAC.. here is the link to generate or Use the PAC

http://www.cisco.com/en/US/docs/wireless/access_point/12.3_8_JA/configuration/guide/s38local.html#wp1050270

lemme know if this helps..

Regards

Surendra

======

Please dont forget to rate the post if this answered your question or was helpful

Re: AP 1142N eap-fast

csco11224163 — Thu, 09 Dec 2010 06:00:53 GMT

I will try it again ,thanks for your

link.

Re: AP 1142N eap-fast

Surendra BG — Thu, 09 Dec 2010 06:04:26 GMT

Ok.. No problem!! lemme know how this works out for you!!

Regards

Surendra

======

Please dont forget to rate the post if this answered your question or was helpful

Re: AP 1142N eap-fast

Surendra BG — Fri, 10 Dec 2010 01:56:19 GMT

did that work??

Regards

Surendra

===

Please rate the posts which answered your quiestion or was helpfull